Spyder#353
New member
Today I decided to find that virbration thats been driving me coo coo. I've read everything on the forum about. I found the long turnbuckle, couldn't find the short turnbuckle. I removed the trunk and to my suprise no small turnbuckle. Huuuum! look in from under the bike and ther it was. I could only see about a half inch of the joint. I had to remove the oil cooler screen and the plastic holding it. There it was. The nut sitting hard on the bracket. Don't know how they could aline everything. That nut bent the steel over. Had to unbolt the cooler and swing it aside. Tie the plastic cooler guard up and away. Took my die grinder and a deburring tool and went at it. Twenty minutes later the steel around the nut was gone. Tomorrow I'll put everything back together. What I learned today. How to remove the trunk for no reason at all :gaah: Tomorrow is an other day. Wiring my Bushtec trailer to the RT. :cus:
There is something to be said for battery powered tools.
:2thumbs:
There is something to be said for battery powered tools.
:2thumbs:
