Smokin' Al
New member
Has anyone successfully added a USB port to the dash switches or elsewhere without using T taps - via accessory. How was it wired?
Last edited by a moderator:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Can I Add a USB to 2014 RTL without using T taps?
- Thread starter Smokin' Al
- Start date
JayBros
Well-known member
One option is to eliminate the analog fuel and temperature gauges and rely on the digital display. Some folks replace the temp gauge with a volt meter and you could put a USB receptacle in the left side. The diameter is 52 mm. Sorry, don't know squat about the wiring but I'm sure some folks can advise and I believe you won't have to use T taps but can plug directly into existing wiring that powered the analog gauges.
Smokin' Al
New member
Was hoping to keep those gauges. Perhaps someone has another option. Thanks for the ideas.
What do you mean about not using T taps?
IdahoMtnSpyder
Active member
All four of the switches on the dash, even if there is no switch installed, have a connector underneath that have both switched 12v and ground connections. I think you can just plug a spade connector into them.
Smokin' Al
New member
Didn't know that - I'll explore that option. Thanks
Similar threads
