Bumpskid LED's w/ Fender Tips

[M109Dreamer]

So we have a 2011 RTS with brightsides front and rear w/ the TIPS. We recently installed a bumpskid w/LED's and didnt realize it until I was going to hook up the LED's for the bumpskid that its suppose to plug into the same plug as the TIPS wiring harness plug under the A-Arms. Has anyone had a similar problem and found another way to power the Bumpskid LED's while keeping the TIPs working as well.? Wife wants to keep the TIPS so the signals flash with fender LED's.


Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[M109Dreamer]

Any thoughts?

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[jcthorne]

You can connect them both. Connect the bumpskid to the bike, then the brightsides, then the original plug from the tip lights. They daisy chain.

 

[Bob Denman]

When my Bumpskid was being installed: the Technician asked me if I wanted them hooked into the fender marker lights (lit all of the time), or wired in with the foglights (switchable...).

 

[M109Dreamer]

You can connect them both. Connect the bumpskid to the bike, then the brightsides, then the original plug from the tip lights. They daisy chain.

Ok, i guess Im not seeing how you can daisy chain them. Wouldnt you be plugging the opposite plug. To the bumpskid then to the bike? Im looking at them and just cant see how you can hook them all up? I have been told i am slow at times.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[M109Dreamer]

You can connect them both. Connect the bumpskid to the bike, then the brightsides, then the original plug from the tip lights. They daisy chain.

I was finally able to see how the daisy chain worked and got it all completed. Thanks

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[M109Dreamer]

When my Bumpskid was being installed: the Technician asked me if I wanted them hooked into the fender marker lights (lit all of the time), or wired in with the foglights (switchable...).

I tried to use the fog lights plug but mine was a 3 wire plug, even though it only had 2 wires going to it, so the plug wouldnt work. Ended up just daisy chaining all of them.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Bob Denman]

I was finally able to see how the daisy chain worked and got it all completed. Thanks

:clap::congrats: :2thumbs: