BRP Ride the Track March 15th Daytona 2014

[kiki]

it has been a while but still could not get into site to sign up for ride...

Saturday March 15th

Get ready for the 2014 Can-Am Spyder Daytona Bikeweek Owner Event! Get a chance to try out a #CanAmSpyder and also enjoy free food, access to the Daytona Speedway Spring Jam ride on the track and more! March 15th!

Sign up here: Click Here!

still not able to get in to site to sign up guess ill just go there and try to sign up when im at track..

 

[tajohn]

Tried to sign up.........Sorry, the file you have requested does not exist.

Count Annamarie and Tim in.......Leaving Ohio cold for sunny Florida.

 

[kml354]

Track

The thread was started in February 2014. Just saying.

 

[MouthPiece]

You sign up for the ride when you get there. (There meaning the BRP pavilion). Make sure you have a helmet and appropriate riding gear (meaning no shorts).

Chris

 

[tomjchris]

BRP RIDEMarch 15 Daytona

Can't get the link to work Gerry and Tom will be there

 

[Trbayth]

Can't get the link to work Gerry and Tom will be there

The original post is 2 years old. The ride occurred two years ago!

:banghead:

 

[robertl]

I was there yesterday. Some really nice changes to the parking lot and vendor area.

I have no info on the track ride and when I tried to sign up for that last month it was closed.
I was planning to just get there a little early and hope they had some spots open. If not, I was planning to go that day anyway.

They do have the turbo model there at the display, as well as a ST, F3, F3 touring, and RT. Sorry, didn't see what they had available for demo rides.

The CanAm display is separate from their demo riding area but near each other. The demo ride area is near the street side and display is across the walking area closer to the track.

I think everyone will be impressed with the new setup. I think they did an outstanding job and it was much more enjoyable to walk around.

Link to vendor area map: http://www.daytonainternationalspee...spx?_id=6279A3E33FFB4CB39C4D5FB912E38608&_z=z

Or you can look at all the maps here: http://www.daytonainternationalspeedway.com/Visitor-Center/Maps.aspx

PS: It was a bit cooler this year than last (last was very hot). It was about 70 with a good breeze and temp dropped quickly when the sun set. Next weekend should be warmer, low 80s but not as hot as last year. 30% chance of rain in the afternoon/evening.

http://www.wunderground.com/cgi-bin/findweather/getForecast?query=daytona+beach,+fl

Ride safe.

 

[bodymanpainter]

I was there yesterday. Some really nice changes to the parking lot and vendor area.

I have no info on the track ride and when I tried to sign up for that last month it was closed.
I was planning to just get there a little early and hope they had some spots open. If not, I was planning to go that day anyway.

They do have the turbo model there at the display, as well as a ST, F3, F3 touring, and RT. Sorry, didn't see what they had available for demo rides.

The CanAm display is separate from their demo riding area but near each other. The demo ride area is near the street side and display is across the walking area closer to the track.

I think everyone will be impressed with the new setup. I think they did an outstanding job and it was much more enjoyable to walk around.

Link to vendor area map: http://www.daytonainternationalspee...spx?_id=6279A3E33FFB4CB39C4D5FB912E38608&_z=z

Or you can look at all the maps here: http://www.daytonainternationalspeedway.com/Visitor-Center/Maps.aspx

PS: It was a bit cooler this year than last (last was very hot). It was about 70 with a good breeze and temp dropped quickly when the sun set. Next weekend should be warmer, low 80s but not as hot as last year. 30% chance of rain in the afternoon/evening.

http://www.wunderground.com/cgi-bin/findweather/getForecast?query=daytona+beach,+fl

Ride safe.

I agree, the lay out and the way it is set up is major improvement over the past years!
Toby