Rattlebars
New member
One should always test polarity any circuit or plug added before actually using it. Rule of thumb?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
BRP Garmin Zumo GPS Holder for F3 models
- Thread starter LifeLongRider
- Start date
Bballistick
New member
That’s what I did too. It wasn’t that hard at all to connect it up.
LifeLongRider
New member
Ok, so I mounted the Lamonster GPS holder today on my 2019 F3 LTD. Next step is run the wires from my Garmin cradle down to the GPS power and audio plugs on the left side. Question is, once I'm all hooked up, where do I navigate to on my instrument panel to get the GPS audio out of my speakers? Anyone who has done this on a 2018 should have the answer. This BRP Connect stuff is a whole nuther learning curve:dontknow:
McClendons
Member
Following ur post. Hope it can be done, but do not have much confidence in bro connect. I want Bluetooth, Anza nd unfortunately bro connect does not really do that yet.....
LifeLongRider
New member
Ran the wiring yesterday for my Garmin 660 down to the power plug on the left side under the side cover. To my surprise there is no longer a male audio connector. Power plug only (see pic). Will have to be Bluetooth for the audio.
Attachments
GaryinWI
New member
There is an unused switched power lead under the left access panel as I recall. It is labeled. Ask dealer when you pick up bike. I’m sure they’ll tell you. Or have them do it for few $. I got a power plug pigtail for my battery maintainer plug that into 2ndport on LaMonster mount which is wired always hot back to battery.. Works and looks great.
fabydom999
New member
Yeaaa but doesn't feed my garmin?
