BRP Front End Recommendation (@ 4mm thread depth on front tires)

[groundeffect]

I hear BRP recommends swapping around the front tires once the thread depth reaches 4mm. Just wondering if anyone else has heard this, and if it would be possible to get a JPEG or PDF of this information from BOSSweb?

Thanks in advance.
Cheers.

 

[DragonSpyder]

There are a ton of threads on this. The Toe is not set properly if they are wearing uneven. Swapping them is just putting a bandaide on the situation. Once the Toe is set properly (0 to slight toe-in) it turns and handles a ton better.

 

[groundeffect]

There are a ton of threads on this. The Toe is not set properly if they are wearing uneven. Swapping them is just putting a bandaide on the situation. Once the Toe is set properly (0 to slight toe-in) it turns and handles a ton better.

Thanks for your note on this. Can you refer to any threads in particular?

My front tires are wearing fine, as normal, but heard about this and wondering if there was a PDF available. If I do need to swap them I would like to have the PDF (print) in my hand when requesting the work.


A pdf or scan would be helpful for this and to have for my records.
thank you.

 

[docdoru]

Changed the front tires @ 60K due to front hydroplaning.....:yikes:pps:

 

[DragonSpyder]

Here is a good post on setting Toe. If they are not wearing uneven then I would not touch a thing.

http://www.spyderlovers.com/forums/showthread.php?t=20130&highlight=tire+wear

 

[groundeffect]

Here is a good post on setting Toe. If they are not wearing uneven then I would not touch a thing.

http://www.spyderlovers.com/forums/showthread.php?t=20130&highlight=tire+wear

Thanks.

My front tires are currently wearing evening without any issues.

thank you.
Cheers.