BRP adjustable Driver Back Rest

[Pirate looks at --]

Ok on the F3 Limited how do you adjust the back rest forward. The one I sat on leans way to far back. So how can I move it forward, and how can Adjust the tension on the back rest so it doesn't flop around so much!

Thanks,

 

[Tango]

Push it down. Reach in following the shaft. There is a screw you can turn. Play with that till you get it the way you want. :thumbup: Tom :spyder:

 

[Tango]

Mine is rock solid. Make sure you have it in the slot behind the seat. :thumbup: Tom :spyder:

 

[Pirate looks at --]

Screw

Is that screw attached to the Seat?

 

[Tango]

Is that screw attached to the Seat?

No it is attached to the backrest. Push it forward, down onto the rider seat. I had my wife stick her little fingers in there. It is a very small screw. :thumbup: Tom :spyder:

 

[Tango]

No it is attached to the backrest. Push it forward, down onto the rider seat. I had my wife stick her little fingers in there. It is a very small screw. :thumbup: Tom :spyder:

Will try to get a pic later today. :shemademe_smilie: Tom :thumbup:

 

[Pirate looks at --]

Thanks

Thanks Tango!

 

[SpyRyd]

Ok on the F3 Limited how do you adjust the back rest forward. The one I sat on leans way to far back. So how can I move it forward, and how can Adjust the tension on the back rest so it doesn't flop around so much!

Thanks,

Here ya go, Pirate.

http://instructions.brp.com/content...ble Driver Backrest&rel_part_number=219400498

 

[Pirate looks at --]

Nice

Thanks so much!

 

[Michaelscs]

I recommend putting a little blue Loctite on the screw. Mine turns too easy and it lost my adjustment over time.
You can still turn it with the Loctite; it just turns harder but holds its setting.