Brake pads for RS.

[sandrunr1]

Where do I get these pads? Is there a sponser here and who?

 

[SpyderAnn01]

I haven't heard of an aafter market brake pad. You can buy them at your dealer just be sure to get the generation 3 pads. They are easy to install yourself so you can save on the labor charge.

 

[NancysToy]

EBC makes Spyder brake pads, but they haven't received very good comments here. Do yourself a favor and go to the dealer (or order direct) and buy the BRP generation 3 pads with the resilient backing to limit noise.

 

[boborgera]

Where do I get these pads? Is there a sponser here and who?

I agree with the last posts, Go to your dealer and get the Gen 3 pads, I used them on my 08 Gs there worth every dollar spent.:thumbup:

 

[Questions]

Do the "Gen-3" pads have a unique part number or label to tell them apart from earlier versions? Docdoru says fronts last 30k and I have 29k so I better order some. Thanks

I haven't heard of an aafter market brake pad. You can buy them at your dealer just be sure to get the generation 3 pads. They are easy to install yourself so you can save on the labor charge.

 

[boborgera]

Do the "Gen-3" pads have a unique part number or label to tell them apart from earlier versions? Docdoru says fronts last 30k and I have 29k so I better order some. Thanks

Rear pads; 219800165
Front ; 219800164

 

[sandrunr1]

Thanks to all.

 

[PCBeachBum]

Never had the thought that Docduro used brakes after what I've been reading about his exploits. Would have thought they were removed and the brake peddle turned into an accelerator, for when his wrist gets tired.:roflblack::roflblack:

Do the "Gen-3" pads have a unique part number or label to tell them apart from earlier versions? Docdoru says fronts last 30k and I have 29k so I better order some. Thanks

 

[Questions]

THANK YOU

Appreciate the help. Thank You

Rear pads; 219800165
Front ; 219800164

 

[FIRECAT]

30000 MILES ON OEM BRAKES IS IMMPRESSIVE! WHEN DO YOU KNOW WHEN TO CHANGE THEM?

 

[Sarge707]

If your changing the Rear Pads on the GS/RS you will need a 9MM Allen socket before you start- ALL auto places and hardware stores I tried only sell 8MM and 10 MM? #Even NAPA, Pep Boys and Ace hardware didn,t have 9 MM! Seems like you order on line?:yikes: