brake light modulator

[quasi]

who sells a good brake light modulator that won't mess with the bikes electrical system?

 

[IGETAROUND]

I like this one, spliced in just above brake switch on right side is a 5 minute install, and works great. Runs your trailer also when you have it hooked up!!! https://www.superbrightleds.com/moreinfo/emergency-strobe/brake-light-strobe-module/195/845/?utm_source=googlebase&utm_medium=base&utm_content=LSC-100A&utm_campaign=GoogleBaseChild&gclid=CjwKEAjwka67BRCk6a7_h_7Pui8SJABcMkWRJUMOnz20yF2TBFcOaRVG2UP68j44bh2uEOcnOlra5hoC1Mrw_wcB

Al in Kazoo

 

[Dan McNally]

I have the "Back-Off XP" - it works well.

 

[CapeSpyder]

I have the "Back-Off XP" - it works well.

2ND :thumbup: Dealer installed

 

[Highwayman2013]

Try the Gear Brake.

 

[Buggy]

I have a Custom Dynamics Gen 2 brake modulator for the RT....works well.

 

[ttrac]

I 2nd. the Custom Dynamics works great.:2thumbs:

 

[remark2013]

We have the Custom Dynamics as well and couldn't be happier!

Kent

 

[PaladinLV]

I use the Magic Strobe which comes with 9 different patterns.
Works great

AJ

who sells a good brake light modulator that won't mess with the bikes electrical system?

 

[joebryanjr]

I added a gear Brake (www.gearbrake.com). in addition to being a modulator, it also has a counterbalance that flashes the lights when you slow down, before you touch the brake, there for giving a couple seconds additional time. It is also good when going through the twisties if you use the motor to slow down and not the brakes.

It comes in a plug and play version that I was able to install myself.

 

[Old Prof]

gear brake....

I added a gear Brake (www.gearbrake.com). in addition to being a modulator, it also has a counterbalance that flashes the lights when you slow down, before you touch the brake, there for giving a couple seconds additional time. It is also good when going through the twisties if you use the motor to slow down and not the brakes.

It comes in a plug and play version that I was able to install myself.

Where specifically does it plug in? :dontknow:

 

[Hypurone]

and for any F3/S owners wondering, they do not have a plug n play harness currently.... they did not elaborate in their email response as to whether or not they will be making one.

 

[joebryanjr]

Where specifically does it plug in? :dontknow:

The gear brake plugs into the brake wiring harness, I have a 2014 RT, there is a plug under the seat. I then placed the module on the right side under the seat.
They have plug and play models with instructions based on your particular model.

 

[cyclekid58]

Brake Light Modulator

I have a Custom Dynamics Gen 2 brake modulator for the RT....works well.

I have same one, totally plug and play, no cutting or splicing of wires and has 10 different patterns including the x blaster & works well, very attention getting.

 

[SpyderHands]

I have same one, totally plug and play, no cutting or splicing of wires and has 10 different patterns including the x blaster & works well, very attention getting.

Who is the manufacturer?

Can you share source info please?

 

[cyclekid58]

Brake Light Modultor

Who is the manufacturer?

Can you share source info please?

Custom Dynamics Magic Strobes Gen 2, completely plug and play with no splicing. We just installed one on my wifes bike along with the TricLed high mount brake/running light. Value accessories a spyderlovers sponsor sells it.

 

[SpyderHands]

Custom Dynamics Magic Strobes Gen 2, completely plug and play with no splicing. We just installed one on my wifes bike along with the TricLed high mount brake/running light. Value accessories a spyderlovers sponsor sells it.

I have the F3S and just got off the phone with Custom Dynamics and they do not currently make anything for my model (brake light & turn signal are on same wire, thus it would strobe both the urn signals and the brake at the same time.) :gaah: