ndspyderlover
New member
I have the brake failure code on my can am rt-s. is it possible to overfills the resevoirs? thanks for the help
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
brake failure
- Thread starter ndspyderlover
- Start date
jimsturges
New member
Mine came on the other day and they had to add just a little DOT 4. They told me it had to run between the min and max or the error would go off. So with that being said I would think you could over fill it. The dealer then had to clear the code 1/2 hour labor.
Don't claim to know it all but that is what my local dealer told me
Hope that helps
Jim
Don't claim to know it all but that is what my local dealer told me
Hope that helps
Jim
Bob Denman
New member
If you overfill it; you'll end up with brake fluid running down over the rear framework... :shocked:
...taking the paint off in the process! :yikes:
Use an eyedropper to add it. This way, you can always suck a little bit back out... :thumbup:
...taking the paint off in the process! :yikes:
Use an eyedropper to add it. This way, you can always suck a little bit back out... :thumbup:
Similar threads
