Body Panel Part Two!

[AeroPilot]

Prongs and Grommets? Hook it FIRST

The main latch that holds the side panel on is the top Hook. see pic The instructions on page 48 are poorly written, and the dealers dont show you the trick

to keeping them on!!! they sell more panels that way . O

:roflblack:The instructions for putting the panels on should say:

1...HOOK the TOP HOOK ONTO the EDGE of the FRONT FASCIA


2.. Make sure all grommets are in place- SPIT, WIPE, LUBE or do what you will.

3.. With the HOOK holding the panel at the TOP, wiggle, jiggle, and stand on your head to ease the prongs into the grommets.

4. Ryde and Smyle 'cause now they are Hooked In Place!! JMO

 

[Eckhard]

Rubber Grommets AKA Oval Washer P/N 705000321 Cheap Cycle parts sells 4 packs. Same Grommets used on all years of all Spyders
Strangely enough, you can find that same part for SeaDoo's, and Outlander and Renegade ATV's though they get progressively more expensive.

What is the relative order of expense for the different vehicles?