• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Blinkers/4-ways stopped working - anyone else? Ideas?

CourVO

New member
2019 RT Limited

The only thing that works about my blinkers/4-ways is the green arrow indicator lights on the display.

After one or two green arrow flashes, they start blinking faster.

Tail lights, brake lights, headlights high/low, running lights all work fine.

No blown fuses.

Fender lights are on, but don't blink or "swipe"

Anybody else seen this?

Dave C
 
2019 RT Limited

The only thing that works about my blinkers/4-ways is the green arrow indicator lights on the display.

After one or two green arrow flashes, they start blinking faster.

Tail lights, brake lights, headlights high/low, running lights all work fine.

No blown fuses.

Fender lights are on, but don't blink or "swipe"

Anybody else seen this?

Dave C

The only thing I can think of is the common issue with folks that switched from Halogen / incandescent bulbs to LED's ..... the lowering of the resistance (?) with LED's can confuse the computer. ..... however lights that blink Faster are a lot more noticeable & to me that's a good thing .... Mike :thumbup:
 
Thanks, BlueKnight....

The blinkers don't actually blink faster...they don't blink at all.
It's the green indicator arrows on the front display that blink faster...usually that means a glitch in the system somewhere.
Equipment is all original...no switching of bulbs.

Appreciate your response,

Dave C
 
I’m not sure what model you have and if this even applies but if I remember correctly the turn/blinker wire attaches in up by the mirror, I think. Could the mirror have pinched a wire or if you have magic mirrors when removing the plug could you have pinched, pulled, or stripped the wire? Again, I can’t remember, and I might be totally wrong, just thinking the union for them started or was up by the mirrors. When I hit a deer both mirrors were destroyed and none of my flashers or turns worked. The icon light on the dash rapid blinked until they reattached all the wires for the mirror. What model and year do you have? I have a 2016 RT book I just purchased when I needed help with my last repair.
 
Last edited by a moderator:
Back
Top