Battery removal suggests a mod.

[Neez]

Hey, Larry. You can put it on the rear center if you grind a little from the plastic trim (to clear the ring).

Yep, the only reason I split the rear hole was to deal with my Ind 7 rack and keep it's long center screw in place. Makes pan removal quicker. Alignment between holes wasn't an issue.

 

[pjp623]

Ok first thing you want to do is count how many you need and figure out are you doing them all in black or stainless steel when you order you should order a few extra just in case. then go to kurveygirl.com on the left side click on dzus
on the next page in the same area click on dzus kits now their are no part numbers you just have to decide what you want to use i used d-ring for oem plastic 14mm they list some with pop rivets i did not use these the clip just slides on then put the dzus thru and you are done. look at the picture in my first post hope this helps. I checked the package no part number on that either.

Thanks Roger, I'll check it right out.