• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Bad day yesterday on the spyder .

ezgoing

New member
Was riding my 2014 rt limited with some friends yesterday . Was running the speed limit(65mph) . All of a sudden the vss came on and the engine light started flashing . I pulled over and stopped the bike turned it off and waited a couple of minutes . Started it back up no idot lights came on. went had lunch . Driving home the same thing happened again . Drove it home as slow as possible . Anyone have any ideas as to what might be going on ? I did pull a couple of codes . It has less than 8,000 miles on it . Thanks in advance .
 
Why would you tell us you pulled a couple of codes, then not tell us what they were, while asking us what went wrong????

Tell us the codes and maybe we can help

Cruzr Joe
 

Gee Joe haven't you heard of "Mental Osmosis"? ( was wandering the same thing) I know we're good but that was impossible!

Jack
 
Let's see....

VSS (Vehicle stability system) couple of things here. In some occasions it will flash when moving when it is engauged. This is normal and will go away. Could be some manuver you made. If constant with the limp home mode there will be a malfunction indicating its not safe to drive normally. Then it can also have something to do with the seat sensor under the passenger... without the codes its hard to go further....:thumbup:
 
Why would you tell us you pulled a couple of codes, then not tell us what they were, while asking us what went wrong????

Tell us the codes and maybe we can help

Cruzr Joe

Don't tell me your crystal ball is in the shop... AGAIN! :yikes:
 
Had the same thing happen to my 2011RS, it was a front wheel speed sensor that went bad. Take it to the dealer.
 
:agree: I was just looking around for what they were also... :dontknow:

Just taking a wild a@@ guess. Based on the symptoms described. The first code could be P061E. Brake state invalid. Possible faulty brake light switch, faulty brake pressure switch or the wiring to them.
 
...unless the foot is JUST lightly touching... :dontknow:

There should never be brake pressure without the brake light on. Brake light comes on first.

When you ride with your foot on the brake and it just puts the light on or if the brake light sticks on. No harm done and no errors. Just can't set the cruise control. But if you put just a little more pressure on the pedal. Now the brake light is still but now there is pressure in the brake system. Now if this goes on for a while. This is judged as something wrong with the brakes as it should. Why would you drive down the road with brakes on.

PS If you have good hearing and a quiet garage. When you press the brake pedal. There are 2 clicks. The first is the brake light switch and the second is the pressure switch.
 
Last edited:
Update

Dealer said it was a bad brake light switch . Said that i should have it back next week tuesday . It is still under warrinty . That's a help but have to drive about a hour to pick it up. Hope we do not have any more problems with it . This the second time to the dealerfor a problem with it .
 
Back
Top