Back turn lights - update and question

[Martin Slovakia]

So I have ordered those LED lights as Wippi suggested to me, but now I have another question.. yea yea.. again
SO basically I have removed the ugly turn lights, now I have those LED lights, I "just" need to find some proper PIN for them and mount them.. - 3rd picture, so I do hope some garage can help me with that, coz I am really an office plankton..
ANyway.. MY QUESTION finally:
You guys, in US you dont have those turn lights.. right?
So according to picture 1 - as you can see, there will be a hole in that plastic cover after removing those turn lights.. so do you have a different bottom plastic cover, or you have some extra plastic cover, just to cover the area where rest of the world has those turn lights?I am asking because, maybe I can order just the small part that will cover the missing plastic- from US.
thanx for your reply..
Martin

 

[vondalyn]

looks like a cover plate

Hi Martin,
No, we don't have those lights, and from what I can tell, it looks like we have some kind of cover plate over the area where you have the lights. See attached picture. The red part is the tail/brake light and the cover plate is immediately forward of that.

Does that look like the same shape as the cut-out for your lights?

 

[Wippi01]

I use amp superseal connectors for all electrical farkles...I just cut off the old connectors and use the superseal ones. Unfortunately they are not compatible with the ones BRP uses.

 

[Wippi01]

As for your question about the cover plates...these are probably the ones you need...

http://partstream.arinet.com/Mobile...jlC0O8QByRU0npRHUQLmy7AK-FJA4aoJMucfsmM1.html

 

[Chupaca]

Try this..!!

cheapcycleparts.com they have the parts break down and include the european and north american parts. Good prices for original equipment. terminals you should be able to get at you local auto parts store. :thumbup:

 

[gunnar]

So I have ordered those LED lights as Wippi suggested to me, but now I have another question.. yea yea.. again
SO basically I have removed the ugly turn lights, now I have those LED lights, I "just" need to find some proper PIN for them and mount them.. - 3rd picture, so I do hope some garage can help me with that, coz I am really an office plankton..
ANyway.. MY QUESTION finally:
You guys, in US you dont have those turn lights.. right?
So according to picture 1 - as you can see, there will be a hole in that plastic cover after removing those turn lights.. so do you have a different bottom plastic cover, or you have some extra plastic cover, just to cover the area where rest of the world has those turn lights?I am asking because, maybe I can order just the small part that will cover the missing plastic- from US.
thanx for your reply..
Martin

This is how i did. and i bought the original
contacts too. Easier to remove and attach
If you choose to use LED,s you must get the resistans.

 

[Martin Slovakia]

its almoust done

Well I did it myself.. Will see how long it will last, but I try to protect it with all the rubber and duct tape etcetc..
Thanx for websites that has those extra OEM parts.. but it is not the same however. My missing part after removing those turn lights is much bigger that yours cover in North America.
So either I will cut a plastic from the original part and reorder it, or maybe I will ask some garage to do it for me.

Have a great day guys and thanx for all the tips.!!!