Anyone have pictures of Allot Orange with a wrap?

[Orange monster]

Anyone have pictures of Alloy Orange with a wrap?

I'm looking at maybe wrapping my hood to help cover some of the rock chips in the matte paint but cant find any Alloy Orange spyders with any kind of wrap. Anyone have any pictures or know where there are any?

 

[Laila's Dad]

I'm looking at maybe wrapping my hood to help cover some of the rock chips in the matte paint but cant find any Alloy Orange spyders with any kind of wrap. Anyone have any pictures or know where there are any?

Try www.powersportswraps.com if you haven't already checked them. They are a sponsor on here.

 

[Orange monster]

I've searched the web high and low and can't find one pic of an Alloy Orange spyder with a wrap of any kind. I'm leaning towards the carbon fiber or just matte black. Is your hood flat black of gloss? How has it held up to rock chips? I have little white spots all over mine from rock chips? Almost looks like lint or like white dirt on the hood. Either way its already looking pretty rough in direct sunlight.

 

[Bob Denman]

Contact Pete; he'll be able to point you towards any that he has done... :thumbup:

 

[Laila's Dad]

I've searched the web high and low and can't find one pic of an Alloy Orange spyder with a wrap of any kind. I'm leaning towards the carbon fiber or just matte black. Is your hood flat black of gloss? How has it held up to rock chips? I have little white spots all over mine from rock chips? Almost looks like lint or like white dirt on the hood. Either way its already looking pretty rough in direct sunlight.

My hood is looking pretty good. No real noticeable chips and yes I have the matte black finish too. Most of my chips are on the actual panels from rocks or whatever and make me wish I could protect the paint. It could be your main riding conditions or just you have more miles than me. The wraps seem real cool. I just haven't seen one that "jumps out at me" yet.

 

[Chupaca]

Here's what you do..!!

upload a picture of your spyder into an art program and play with it. Always did this when painting bikes or cars. So many colors to play with. Hope you find a suitable solution..!! :thumbup:

 

[Fire Joe]

My hood is looking pretty good. No real noticeable chips and yes I have the matte black finish too. Most of my chips are on the actual panels from rocks or whatever and make me wish I could protect the paint. It could be your main riding conditions or just you have more miles than me. The wraps seem real cool. I just haven't seen one that "jumps out at me" yet.

You can. This is what I used to protect the custom paint on my ryde.

http://www.xpel.com/

It's been on for more than 2 years now and is still holding up really well.

 

[Spyder Wraps Pete]

Paint protection is a great idea but because his frunk is matte finish you would need a matte finish paint protection film which
will be harder to find I assume. I believe that matte paint protection film is still pretty new. We have never used it but we sell
and install lots of glossy paint protection for cars and Spyders. For Spyders we offer paint protection in pre-cut panels so install
is pretty easy.

I have attached some photos of the 3M carbon fiber film installed. Hope these help....

 

[Spyder Wraps Pete]

FYI, We have created frunk wraps for the Neutron Green RSS.
To create one for the Orange we just need a bike or a panel off it for color matching.
See more photos here.