Any videos on removing the front fenders of 2018 Spyder RT?

[jreijers]

Hi All,

Where can I find pictures or a video how to remove my front fenders?

Even a description would be helpfull.

I'm trying to install led strips white and red on the fender and it seems a lot easier to me to work on the bench when the fenders are off.

I'm sure some of you have done this before.

Thanks for your help,

John

 

[BLUEKNIGHT911]

Hi All,

Where can I find pictures or a video how to remove my front fenders?

Even a description would be helpfull.

I'm trying to install led strips white and red on the fender and it seems a lot easier to me to work on the bench when the fenders are off.

I'm sure some of you have done this before.

Thanks for your help,

John

The fenders are attached to the BRACKETS that are bolted to the HUBS. Go to the cheapcycleparts web site go to Can Am ... then find your year and model and look at the Fiche' ( ie pics ) for the fenders. this will show you exactly how they are made and what parts are involved .... the fenders won't be able to move much because there are wires for the lights ...... I connected my LED strips to the lights that were already there .... good luck .... Mike :thumbup:

 

[JayBros]

It's not a difficult job. If you have concerns about mucking it up take before and after pictures as you go. If you have one jack stand and a hydraulic jack, remove a wheel and you might not need to completely remove the fender.

 

[trikermutha]

Leave the fenders on and take the wheels off. Then remove the fender reflector covers off to put the LED lights on. It was easier than taking the whole fender off. IMO.

Look inside the fender and you will see the screws to remove the covers.

 

[JohnRuckus]

Try this:

https://www.youtube.com/watch?v=hAJBTXhvIAs&t=14s