• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Abs fault vss fault limp home mode

ItsHerz

New member
2011 rss se5. Have bled brakes manually and with BUDS. Brake pressure has and still reads 3600. The pressure will increase slightly when brake pedal is pushed but the low pressure light never comes on. Any thoughts out there?
 
2011 rss se5. Have bled brakes manually and with BUDS. Brake pressure has and still reads 3600. The pressure will increase slightly when brake pedal is pushed but the low pressure light never comes on. Any thoughts out there?


What DTC's is the bike in question setting? And have you checked wiring diagrams for the affected systems to see if there's any common/shared circuits?
 
Only active code is C0044. I have an online manual that the wiring diagram is very difficult to read. Trying to find a better one. C0044 = BLS internal pressure sensor failure BLS fuse is good.
 
Last edited:
Back
Top