2016 RT Limited hard to hold on highway

[Easy Rider]

I am running out of things to try! Any suggestions will be appreciated!! Yes it has been back to the dealer!!!

.
If this really is abnormal for that model, then it should be the DEALER who is responsible for fixing it, not YOU.
Is there a lemon law in Georgia that applies to "motorcycles" ??
If so, I think you should be looking into that.

 

[south GA Farm Boy]

2016 RT Limited pulling to the right!

No Federal EVO tires available at this time in the United States!! My new 2016 RT Limited is still pulling to the right, the handlebars shake at certain speed! Let us go over what has been done to it! It has has 5 different tires on the front of it, been laser aligned 2 times with the Rolo Alignment system, back wheel has been aligned and the tension set, front wheels have been balanced 3 times! Do I need to go on? I have a small amount of loose play in the handlebars, is this normal? Could it be a wheel bearing on the right side? The right side front wheel don't seem to be as easy to turn as the left one does! I am running out of things to try! Any suggestions will be appreciated!! Yes it has been back to the dealer!!!

Carried Spyder to another dealer today! They checked the front end throughly, even took front two wheels off another trike and put them on mine. After all the checking, decided it was a wheel bearing on the right front! New bearing on order, hope to get Spyder back in the next couple of days! Was impressed with this dealer and his commitment to solve my Spyder's problem!!

 

[Bob Denman]

:clap: Glad to hear that some progress is being made... :congrats: :2thumbs:
Please let us know what it finally takes, to get you "Back on Three"! :riding:

 

[south GA Farm Boy]

2016 RT Limited pulling to the right!

Guys,
Talked to the Spyder Tech about 6:00 PM today, and he had got new right wheel bearing installed and took the Spyder for a test ride. He said the pulling to the right was corrected, but the handlebars still shake at certain speeds! Remember, we have tried 3 kenda's tires, two new V-Rubber tires, and the wheels and tires off of a brand new showroom RT on my Spyder. They all shake the handlebars, and pull to the right! It has been laser aligned using the Rolo system twice, back wheel has been aligned and belt tension set to spec's! Since the dealer is over 2 hours away, I haven't been to ride it and see if the wheel bearing stopped the pulling to the right. I am going the first thing tomorrow morning to ride it. Does anyone have a cure for the handlebars shaking at certain speeds (usually around 50-65 miles per hour)? It is only about 5 weeks old with only 1200 miles on it! Most people on here tell me to get new Federal tires, but there is not a set in the United States of America! Yes E-bay and other tire sites show some, but call them, they have them back ordered from China, yes they are made in China!! Help, Help!!

 

[flyday58]

Under warranty still, right? If so it's time IMO to call BRP and get them in the loop, this has gone beyond anything reasonable for a new machine. BRP can "reach out" to your original dealer to impel them to fix your machine or make it right otherwise. Again, just my