2015 rtl rear axle

[Fatcycledaddy]

Does anyone happen to know the torque specs for the rear brake rotor and rear axle nut?
By the way, the cheap Harbor Freight disk brake set has a plate to fit the 2 holes in the rear caliper and the tool turned it back in with hardly any effort. Well worth the money spent.
https://www.harborfreight.com/disc-brake-pad-and-caliper-service-tool-kit-11-pc-63264.html

I searched, came up with a few hundred threads for every word and couldn't find what I was looking for.

Thanks

 

[Fatcycledaddy]

I found this for the front, but nothing for the back yet.

Front caliper bolts are 35 lbf*ft 48 N*m
Front Wheel lugs are 77lbf*ft 105 N*m

 

[Fatcycledaddy]

Found this
rear brake rotor bolts 68 lbf FT
rear caliper bolts 77 lbf ft
rear axle nut 166 lbf ft

However it is showing the 2 piece rear wheel and hub like on the older RT and this is a 2015 manual. Mine has the incorporated hub like a 2016. Does nayone know if the torque specs are the same?

Thanks

 

[PW2013STL]

Found this
rear brake rotor bolts 68 lbf FT
rear caliper bolts 77 lbf ft
rear axle nut 166 lbf ft

However it is showing the 2 piece rear wheel and hub like on the older RT and this is a 2015 manual. Mine has the incorporated hub like a 2016. Does nayone know if the torque specs are the same?

Thanks

They are the same.

 

[Fatcycledaddy]

They are the same.

AWESOME. Thank you very much for the help!!

 

[rwyma]

The rear axle nut is really 177 ftlbs? How do you tighten the nut with the cotter pin? I have a 2013 RTL.

 

[PW2013STL]

The rear axle nut is really 177 ftlbs? How do you tighten the nut with the cotter pin? I have a 2013 RTL.

It's 166 ft lbs. My axle doesn't have a cotter pin, but the hitch bolt that goes through the rear axle does.

 

[KX5062]

The rear axle nut is really 177 ftlbs? How do you tighten the nut with the cotter pin? I have a 2013 RTL.

You remove the cotter pin, tighten and then replace with a new cotter pin. The cotter pin is only to hold the nut onto the axle in case it backs completely off.