-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
2015 rt heated seat wireing question
- Thread starter gabby121
- Start date
cognaccruiser
New member
Only thing that comes to mind is the sensor to tell the Spyder that there is a passenger sitting on the seat. Should plug from seat to Spyder under the seat. Am thinking you don't have a heated seat as it isn't standard. Others should be able to clarify/fill in the details.
Gary
Gary
PW2013STL
Active member
For the CanAm heated seat there is a large connector located on the left side under the panel below the small storage bin in front of the seat. The large seat connector plugs into that and Spyder's connector plugs back into that. From there the wire harness for the seat runs back along the gas tank to the rear and the small connector comes out the opening where the rear passenger seat plug comes out. That end gets connected to the seat. There is also a ground wire attached to the wire harness that you attach to the ground strap in the back towards the rear.
PW2013STL
Active member
If the passengers heated grip is turned on then the passengers heated seat will turn on.
PW2013STL
Active member
Yes
Similar threads
