2014 Drive Belt

[toota]

Does anyone know of a supplier of drive belts who will export to Australia?
This is for a 2014 RT Limited.

Thanks in advance, Rob

 

[Bob Denman]

:dontknow: BRP? :dontknow:
These belts are pretty specialized...
You'd need to know exactly who manufacturers them, and give them a call.
Good Luck, and Happy Hunting! :thumbup:

 

[PrairieSpyder]

Have you inquired at your Spyder dealer?

 

[Chupaca]

Depends..!

You need one or is this for resale.?? Most sellers will ship abroad to individuals you can check cheapcycleparts.com, ebay, amazon to name a few...:thumbup:

 

[toota]

The dealers in the USA will nut supply to Australia.
At least the 12 that I have mailed will not supply outside continental US.
I think that BRP have put a stop to this.

 

[Bob Denman]

Do you have a dealer in Australia?? :dontknow:

 

[Wippi01]

In a recent thread it was pointed out that the F3 in Europe and Australia have different sprockets... If that is also true for the RT, maybe that is why they don't ship to "down under ". Perhaps you might wanna try European vendors...

 

[Bob Denman]

The F-3s heading to those places, are geared the same as the RTs, and use the same belt...

 

[Wippi01]

The F-3s heading to those places, are geared the same as the RTs, and use the same belt...

But are they different to the ones in the US?

 

[Bob Denman]

Yup! The F-3s here in the U.S. get a larger rear sprocket in order to gear them a bit lower. It gives them a better launch off the line... :thumbup:

 

[PrairieSpyder]

I think the OP needs to provide more info. If the RT was purchased in Oz, the dealer there should be able to get parts for it.

 

[billybovine]

In a recent thread it was pointed out that the F3 in Europe and Australia have different sprockets... If that is also true for the RT, maybe that is why they don't ship to "down under ". Perhaps you might wanna try European vendors...

According the the BRP parts catalog all 2014 and 2015 RTs use the same drive belt no matter what part of the world they are made for.

 

[Bob Denman]

I think the OP needs to provide more info. If the RT was purchased in Oz, the dealer there should be able to get parts for it.

:agree: There's more going on here, than meets the eye...:dontknow:

 

[toota]

Yes a lot more. Especially money. The price for a new drive belt here in Aust. is in the region of $750.00 AUD.
One of my co-owners bought one from the US for $300.00 AUD delivered.

This might explain why I tried to source one from the USA.

Thanks to all, Rob

 

[Bob Denman]

Have you checked on EBay?? :dontknow:

(I'm always looking for bargains also! :thumbup

 

[BajaRon]

Yes a lot more. Especially money. The price for a new drive belt here in Aust. is in the region of $750.00 AUD.
One of my co-owners bought one from the US for $300.00 AUD delivered.

This might explain why I tried to source one from the USA.

Thanks to all, Rob

Check your PM's. I may be able to help.