2012 spyder RT catches fire

[rjtwospeed]

2012 Spyder catches fire

Thank you for the well wishes for my recovery from my fracture just so you all know it wasn't due to a motorcycle accident it was due to a fall from about 6 feet off the ground slipped off an aluminum ladder in the rain

 

[BajaRon]

My 2012 spyder caught fire while riding it in West Pembroke pines Florida on a beautiful Sunday afternoon at a traffic light I looked down to find flames coming up through the glove compartment cover and through the side panels thank God I was stopped and some people in cars helped me put it out now BRP says it's not there problem but after the gas cap was changed under the recall I could still smell gas fumes when I came to a stop I wonder how they can say it's not there problem and did / won't even look at the bike that's a load of crap I need a lawyer

There are several possibilities. But my guess would be a saturated EVAP canister. That's why I recommend the Canister-Ectomy. Cheap, relatively easy, doesn't hurt a thing and eliminates any possibility of fire due to having it installed.

 

[pegasus1300]

Thank you for the well wishes for my recovery from my fracture just so you all know it wasn't due to a motorcycle accident it was due to a fall from about 6 feet off the ground slipped off an aluminum ladder in the rain

:gaah:that even hurts to hear about. Good luck on your recovery. Hope it leaves no evil aftereffects.

 

[crazycanuck]

so when your Spyder caught fire you were riding with a shattered ankle??:dontknow:

 

[MR. H1956]

Sorry about your accident. Good luck on a speedy recovery. Maybe by the time you can ride again the bike issue will be fixed and you will be well and ready to get out in the fresh air and sunshine. Happy trails and gods speed.

 

[loisk]

I am surprised that no one has suggested you contact [email protected] - at the very least brp need to know about this - not just the dealer.
Hope your insurance covers you.
It would leave a sour taste - your "new" spyder self-combusting...
Hope you get back on a spyder soon!

I had an rs, then st, then when f3 came out husband joined the three wheel brigade - less plastic = less heat and heat-related problems under all the plastic. It only took me a year to swap my st for an f3 - best decision ever.

 

[RinconRyder]

Back in the day (50's 60's) we rode primarily British bikes which always seemed to leak gas from the petcock or the "tickler" right onto our feet. My feet would always be freezing from having gas dripped over them. I never remember anyone's bike actually breaking out into flames from this and I cannot explain why it never seemed to happen. Of course we didn't have items like the "afterburner" on those bikes so heat was not the problem it is today.

 

[Ironbutt]

Heat Build up

My 2012 spyder caught fire while riding it in West Pembroke pines Florida on a beautiful Sunday afternoon at a traffic light I looked down to find flames coming up through the glove compartment cover and through the side panels thank God I was stopped and some people in cars helped me put it out now BRP says it's not there problem but after the gas cap was changed under the recall I could still smell gas fumes when I came to a stop I wonder how they can say it's not there problem and did / won't even look at the bike that's a load of crap I need a lawyer

Did you get a lawyer?
I am having serious heat build up on my 2013 RT LTD. Have had Master Cyl milt from heat , Brake line melt, Gas Boiling or bubbling, Discolored and warped panels from excess heat build up, I could go on but you get the idea. BRP basically has said you purchased the unit now deal with it. (purchased new) Have had all recalls and up grades preformed. The bike has been declared not safe to ride by the dealer.
I also am going to seek out an attorney. Was wondering what was your resolution to your Spyder?

 

[Bob Denman]

2013 RTs were the "Problem Child": when it came to heat complaints, and episodes of unexpected campfires occurring... :gaah:
Have you had the air scoops installed; as well as all of the underbody modifications? I haven't heard of anyone continuing to have problems; once all of the heat attenuation protocols had been completed.

 

[JKMSPYDER]

HEAT BUILDUP

I agree with Bob! Have the air scoops been installed and other heat modifications done?

 

[BoilerAnimal]

Did you get a lawyer?
I am having serious heat build up on my 2013 RT LTD. Have had Master Cyl milt from heat , Brake line melt, Gas Boiling or bubbling, Discolored and warped panels from excess heat build up, I could go on but you get the idea. BRP basically has said you purchased the unit now deal with it. (purchased new) Have had all recalls and up grades preformed. The bike has been declared not safe to ride by the dealer.
I also am going to seek out an attorney. Was wondering what was your resolution to your Spyder?

We have a 2013 RT-S and have had all of the recommended updates for the heat problem done and I can honestly say that it is actually not nearly as hot as I would expect from sitting on top of an enclosed engine. The only thing that is still hot is the area for the radiator exhaust by my right foot. I wear insulated work boots when we ride so even that is not much of a problem. We ride in hot weather with no more discomfort, maybe even quite a bit less from what some have said, with mesh jackets with body armor inserts and I wear a modular helmet, while my wife wears a 3/4 helmet.

The first thing I would check is to see if the air scoops under the mirrors have had a full size opening cut for them. It's possible they only have a small hole or maybe even none (forgot to do). That would have a major impact on the effectiveness of the mods.

 

[Bob Denman]

Thanks for the perspective from an owner of an affected bike! :thumbup:

 

[wilpir]

Would any of these heat related problems be on my 2012 rt limited? Air scoops? What are they do I need them? I am planning on taking off bottom panel as per Lamonster recommended and I have installed right side grill and block off panel from a 2013? rt do I need to do anything else? Thanx this site is AWESOME!! :bowdown:

 

[Bob Denman]

Your dealer can order the air scoop kit for you. I believe that they are (or at least were...) about 80 bucks. The replace the fixed air deflectors that are just below your mirrors, and they'll funnel more airflow down into the bodywork of your bike.
The 2013s were affected by underbody heat issues, due to the new frame being brought out before the new triple engine was ready. There were a lot of obstructions that blocked the airflow that the twins needed.

 

[wilpir]

Thanx again Mr Denman! So I ask my dealer for the air scoop kit? ..I also will do a search

 

[Bob Denman]

please... I'm just a "Bob": to my friends! :thumbup:

If you search for something like:
"2013 RT Recall"
or
"heat attenuation"
or even
"scoops"

It should get you close to what you're looking for.

 

[wilpir]

OK Mr Bob I found the vents at 2wheelpros....can am dealer said he couldn't get them?..$101.46 shipped..jeez does my 2012 need them if I remove bottom panels?

 

[Bob Denman]

As I recall: those inner panels had a fair amount of structural "usefulness" in them...
Take a look at them, and see if you can create some openings in them; that doesn't make them useless...
Let us know what you find, and take some pictures! :2thumbs:

 

[wilpir]

Sorry not inner panels I meant belly pans as several threads say remove them and keep off? sorry for the hijack I should of started new thread...:banghead:

 

[Bob Denman]

Go ahead and "Swiss-Cheese" those babies! :thumbup: