• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

2008 Spyder - H7 Halogen Bulbs

JerryB said:
Hi folks,

One supplier is telling me that these bulbs will fit with no mods at all:

https://www.powerbulbs.com/us/product/philips-xtreme-vision-130-h7-twin

Can anyone confirm this? Just looking for a '2nd opinion' before buying.

Just want to get something that I can merely change out with none of the 'cut here' or ' remove this' type of work/effort.

Thanks for your thoughts,

Jerry Baumchen
Click to expand...
I think where the problems comes in when trying to install the led bulbs. These should fit right in being they are a H7 bulb. Just use gloves and don't touch the bulbs with the bare hand.
David
 
2008 H-7 bulbs

Hate to burst your bubble but unless the 2008's headlights are attached completely differently than the 2014's then the round base of that bulb is not going to fit through a lock down clip with an oblong, rectangular opening without alteration to the clip. Might want to take things apart and compare your clip to the pictures of the bulb.:yikes::yikes::yikes:
 
H7 is an H7

JerryB said:
Hi folks,

One supplier is telling me that these bulbs will fit with no mods at all:

https://www.powerbulbs.com/us/product/philips-xtreme-vision-130-h7-twin

Can anyone confirm this? Just looking for a '2nd opinion' before buying.

Just want to get something that I can merely change out with none of the 'cut here' or ' remove this' type of work/effort.

Thanks for your thoughts,

Jerry Baumchen
Click to expand...

Jerry,
They are H7 incandescents. So they don't have transformers or power supply like HIDs or LEDs, that will cause additional work or cutting. The transformers mount on the back or are attached by wire. These should be a straight swap. The issue is replacing the headlights, period. Having read several strings, and replaced bulbs on bikes for the past 50 years, the GS Spyder is one of the Most Difficult Ever. I wear 4x gloves, thumb to pinkie is 12.5 inches. I'm going to disassemble the entire dash area soon, as I'm going to install LEDs.
 
Hi IGETAROUND,

Re: the round base of that bulb is not going to fit

Here is a photo of an H7 bulb - note the type of electrical contacts)

H7.JPG

Or does this -> the round base of that bulb

mean something else?

Are you saying that this bulb will NOT fit into an '08 Spyder?

Jerry Baumchen

PS) I readily admit that I know little of this stuff; just trying to get definitive answers.
 
Hi Matahead,

Re: They are H7 incandescents.

When you say 'they,' just what are you referring to; the factory bulbs or the halogen bulbs, or other?

Re: The transformers mount on the back or are attached by wire.

What 'transformers' are you to referring to?

I had a good discussion with the Tech Dept at PIAA this morning ( they are a local company ) and he said that to replace my factory bulbs, I would not need any 'transformers.'

Jerry Baumchen
 
h-7 bulbs

JerryB said:
Hi IGETAROUND,

Re: the round base of that bulb is not going to fit

Here is a photo of an H7 bulb - note the type of electrical contacts)

View attachment 151183

Or does this -> the round base of that bulb

mean something else?

Are you saying that this bulb will NOT fit into an '08 Spyder?

Jerry Baumchen

PS) I readily admit that I know little of this stuff; just trying to get definitive answers.
Click to expand...

Jerry,

I have no idea whether these will fit your 08 or not. My suggestion would be take it apart, bring your current headlights out where you can clearly see the electrical connection AND how they are held into the bulb housing of the headlight.

Those round bases would not work on my 2014 RS. will try and get a picture of the LED's from superbright that I made fit in my hold down clips

Al
 
Yes the 2008 takes H7 bulbs and that bulb in the link will fit without any modifications. The Philips xtreme vision bulb is a high performance type. You will be very please with the higher performance. But that performance comes at a cost. It will have a shorter lifespan than a regular H7 type.
 
Hi Billy,

Re: Yes the 2008 takes H7 bulbs and that bulb in the link will fit without any modifications.

Thank You!!!!!! That is exactly the type of info that I was wanting. :yes:


Re: It will have a shorter lifespan than a regular H7 type.

They will probably have a longer lifespan than I have. nojoke

Good enough for me,

Jerry Baumchen

PS) At this point in my life, I really care little for guarentees. :hun:
 
h-7 bulbs

Jerry,

I have no idea whether these will fit your 08 or not. My suggestion would be take it apart, bring your current headlights out where you can clearly see the electrical connection AND how they are held into the bulb housing of the headlight.

Those round bases would not work on my 2014 RS. will try and get a picture of the LED's from superbright that I made fit in my hold down clips

Al

Well I can't get the pictures to copy to here; if you follow this link should take you there:


https://www.superbrightleds.com/mor...b-conversion-kit-with-compact-heat-sink/3932/

What I have been referring to is the round base's on these bulbs; my locking clip had an oblong rectangular hole which required it to be trimmed with metal shears to allow the seating of these bulbs in the head light housing hold down clip. Hope the pictures on the web site will help to explain what it is I'm trying to describe.

Al
 
Hi Al,

Re: the round base's on these bulbs

I was asking about Halogen bulbs only, not LED's. I've read enough about the problems with trying to fit LED's that I do not want to go that route.

Jerry Baumchen

PS) My Philips X-tremeVision bulbs arrived today; hopefully they will be installed this Sunday.
 
You must log in or register to reply here.

Similar threads

I
  • Sticky
**** "DO'S & DO NOTS" for NEW SPYDER OWNERS... ****
19 20 21
Replies
409
Views
1M
Aandtg
A
Back
Top