• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

2008 rs Brake caliper

red

New member
Has anyone any information about rebuilding a 2008 RSS right front brake caliper or where I can get just the "O" rings for inside the calipers.

the cause was my fault, I put on a new rotor and the piston was cocked and did not retract properly so I have disassembled the unit and want to
replace the 8 o rings. A new caliper is several hundred dollars "O"s ten. These are not a brp listed item. Tips or trade secrets welcome.
Thanks RED
 
Has anyone any information about rebuilding a 2008 RSS right front brake caliper or where I can get just the "O" rings for inside the calipers.

the cause was my fault, I put on a new rotor and the piston was cocked and did not retract properly so I have disassembled the unit and want to
replace the 8 o rings. A new caliper is several hundred dollars "O"s ten. These are not a brp listed item. Tips or trade secrets welcome.
Thanks RED

Good question RED. I don't know. you may want to ask BajaRon, I know that he sell the brake pads and rotors for the Spyders.

Mike
 
ImageUploadedByTapatalk1423614466.534194.jpg

When replacing caliper any part that had "New" should be replaced per service manual. Just a fyi they call that out for a reason. It might be a $120 for the new caliper but you can't put a price on your or your passengers safety.

Sempert out,
 
Tough one..!!

did some light checking and found some slave cylinder kit and places that say they have them but don't. Did find the whole caliper for $220.00. You need to dig deep or find the o ring demensions...bad area to guess...:thumbup:
 
I am not certain but i think the caliper is made by Hayse Brake and it looks like their 4 piston motorcycle model. See picture from web site. Sure looks like it to me.

MOTO_zeus_caliper.jpg

They claim to be a supplier to HD. Maybe you could get a rebuild kit from HD.
 
Mabye you could purchase their caliper and they give you a core refund when you send their damaged one back.
 
Has anyone any information about rebuilding a 2008 RSS right front brake caliper or where I can get just the "O" rings for inside the calipers.

the cause was my fault, I put on a new rotor and the piston was cocked and did not retract properly so I have disassembled the unit and want to
replace the 8 o rings. A new caliper is several hundred dollars "O"s ten. These are not a brp listed item. Tips or trade secrets welcome.
Thanks RED

I asked a few people and most replied that they are most likely a BRP spec. part and most likely made in China. The new caliper is $220.99 plus shipping.


Mike
 
Has anyone any information about rebuilding a 2008 RSS right front brake caliper or where I can get just the "O" rings for inside the calipers.

the cause was my fault, I put on a new rotor and the piston was cocked and did not retract properly so I have disassembled the unit and want to
replace the 8 o rings. A new caliper is several hundred dollars "O"s ten. These are not a brp listed item. Tips or trade secrets welcome.
Thanks RED

http://pages.ebay.com/link/?nav=item.view&alt=web&id=201146608141

$50 on eBay right front caliper.

I just ran across it browsing for something else.
 
Back
Top