1st Annual Indiana Chapter Spyderlovers Meet, Greet & Ryde

[8LEGS]

1st Annual Indiana Chapter Spyderlovers Meet, Greet & Ryde
:chat:​

Location: Nashville Indiana area.

Date: Saturday April 17th ----- TODAY

Time: Okay, it looks like we'll meet at Casa del Sol, 51 Parkview, just east of Nashville; it's on the south side of the 46, you can see it from the road.
Tentative time is 11 AM, we'll greet, eat, look over the ryde, and all that stuff.




We would like to get together as many rYders as possible. If you think you may be interested in attending please leave a post and sign up.

Members attending: ​

1. Amanda B
2. 8LEGS
3. Trickie Dick
4. Retread
5. IndyBill
6. Rocketcarwash
7. Charlotte
8.IndianaTerry
9. Funon3
10. Nightcruiser
11. Mark-reese
Did I miss anyone????​

hyea:hyea:hyea:hyea:​

 

[Amanda B]

I'm in!

I'm in!

 

[Trickie Dick]

I can't make it. :roflblack:

 

[superfly3]

Well you know I'm in if its not too cold?:clap:

 

[8LEGS]

I can't make it. :roflblack:

Then I'm coming to get you!!!!!!!!

 

[retread]

Well you know I'm in if its not too cold?:clap:

Under Armor works.:doorag:

Do we know where yet?

john

 

[woodz428]

I'm just across the border in Illinois. I might be interested in coming if the destination gets set. It also depends on my wife's cancer treatments. So I guess I'm a maybe. By then they may have us locked in while they go door to door collecting money for the debt that wants to compete with Ca's.:sour:

 

[8LEGS]

Do we know where yet?

john

No, but given the group so far, Superfly3 is in northern Indiana & Amanda B is in southern Indiana, so somewhere in the middle. I'll ride wherever. :doorag:

 

[Trickie Dick]

I'm just across the border in Illinois. I might be interested in coming if the destination gets set. It also depends on my wife's cancer treatments. So I guess I'm a maybe. By then they may have us locked in while they go door to door collecting money for the debt that wants to compete with Ca's.:sour:

Man, we'd love to have you but you do what you got to do. You got things much more important than a meeting. We will say a prayer for your wife.
Dick

 

[Amanda B]

Hello

Sorry to hear that about your wife. I hope she is okay and that you can come! I'll ray: for you both!


I had my spyder naked today...got fog lights installed and only two bolts leftover :roflblack::roflblack:!

 

[superfly3]

Sorry to hear about you wife too I will say a ray: for her!
Today was my first saturday off all winter and I made use of it too,was working hard putting on mods that I haven't been able to get to till now,I started on saddlebags and got them done then I started NMN risers but it is getting late so I called it a night and will finish tomorrow!:clap::clap::clap:
all in all a GREAT DAY!:thumbup: I can't wait untill spring I want to ride:2thumbs:

 

[Amanda B]

Well...

I couldn't go to bed without those two bolts left...so I figured out where they went, took it apart, and put it together again!! Once I start a job I want to finish it right!! So, all bolts accounted for. I don't want to put fog lights on again!!

With the risers, you have to cut your handle bars correct?

ON a different note: How do you take the silver part of the handle bars off?

 

[Trickie Dick]

I couldn't go to bed without those two bolts left...so I figured out where they went, took it apart, and put it together again!! Once I start a job I want to finish it right!! So, all bolts accounted for. I don't want to put fog lights on again!!

With the risers, you have to cut your handle bars correct?

ON a different note: How do you take the silver part of the handle bars off?

Glad you found a home for the bolts. :clap:
For the ESI risers, yes, you should cut the bars. No, you don't have too. I did. Used a pipe cutter and went slow. Nice clean cut.
Not sure what you mean by the "silver part of the handle bars".
Dick

 

[Amanda B]

Glad you found a home for the bolts. :clap:
For the ESI risers, yes, you should cut the bars. No, you don't have too. I did. Used a pipe cutter and went slow. Nice clean cut.
Not sure what you mean by the "silver part of the handle bars".
Dick

I want to powder coat the silver on my bike...on the handle bar there is the silver plate on top...don't know if I can just remove that part or if I have to take the whole thing off. Trying also to decide whether to go with the risers or not.

 

[retread]

I've never taken THAT part off my spyder; I think there are 8 bolts, 2 different sizes, that come up through the bottom piece. You'll need a low profile socket to get to them, and if you drop 1, be prepared to take the tupperware off, it'll hide in there somewhere.

john

 

[Amanda B]

Tupperware

I've never taken THAT part off my spyder; I think there are 8 bolts, 2 different sizes, that come up through the bottom piece. You'll need a low profile socket to get to them, and if you drop 1, be prepared to take the tupperware off, it'll hide in there somewhere.

john

Well...I've gotten good at getting the tupperware off, unfortunately!!!

 

[IndyBill]

I should be able to make it also. I live in Martinsville but do not care where the get together is. Just more fun riding getting there.

Bill

 

[8LEGS]

Any ideas yet on a place to meet? I was thinking about maybe Nashville, Indiana.? I'm not very familiar with the area so some of you southern riders throw your thoughts and ideas out there.

 

[retread]

There's a Mexican restaurant east of Nashville on 46, the business area can get congested, especially with Spyders around. Some places in Nashville to eat, too, plus lots of shops.
We can toss some ideas up, see what comes down.

john

 

[Amanda B]

Well...is it April 17th yet?

Okay...R we there yet? Really wanting to ride!

That place sounds good to me. I don't know if I'll have the GPS mounted yet, so I'm hoping it's easy to find. I've been to Nashville and Bloomington some, so I'm hoping I've seen the place. I will be there...it just might be that someone ends up being my GPS when I call them :roflblack: