• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

14 Bumpskid -Spyderpops

Brogers57

New member
Which side should be facing the ground?

42f9dc38a43913e90c9ff05d4eb70a91.jpg
or
1a85dec80f660cfadbe6d119396082c0.jpg





Sent from my iPhone using Tapatalk
 
Which side should be facing the ground?

42f9dc38a43913e90c9ff05d4eb70a91.jpg
or
1a85dec80f660cfadbe6d119396082c0.jpg





Sent from my iPhone using Tapatalk

The top picture should be the side facing the ground
You will see the bolts supplied are countersunk so will fit flush If you fit it the other way the bolt will stick out and could catch debris etc

Spyderpops will correct me if I'm wrong
 
Thanks. After looking at the pics you're correct. I'm going to need replacement LEDS as the gel/rubber is damaged exposing some LEDS


Sent from my iPhone using Tapatalk
 
Why exactly is there a cut out? Sadly looks like I have 2 LEDS out! I'm sure Harvey will make it right.


Sent from my iPhone using Tapatalk
 
Why exactly is there a cut out? Sadly looks like I have 2 LEDS out! I'm sure Harvey will make it right.


Sent from my iPhone using Tapatalk

I suspect the grove is there to aid the production it may have to be used to allow the grove to be made at the front for the LED's as the non LED Bumpskid does not have the grove
My concern would be the grove could catch debris as the grove faces the ground when fitted
The best option would for a piece (infill) to be fitted in order to make the underneath flush
Perhaps Spyderpops will comment on this
 
Well I understand why it is cut in the front I just didn't/don't understand why there is one underneath as it may catch something.


Sent from my iPhone using Tapatalk
 
Back
Top