I have a 2010 RT w/o the extra gauges. Has anyone ever tried to put a 12volt cig outlet in the gauge knockouts? I have not pulled my dash bezel out yet, but I was hoping to use a hole saw and drill the right sized hole and mount a water proof outlet. Figured I could find a hot wire to splice into for juice. Just thinkin........what do you guys think or has it been done before. :dontknow:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
12 volt plug in gauge knock outs?
- Thread starter YNUT
- Start date
ornerydog7
New member
Magdave
New member
http://www.spyderlovers.com/forums/showthread.php?60462-Finally-the-last-
Pulled the cap, drilled it, ran the wires(10amp fused) to the jumper posts and glued it all back together with Black RTV adhesive. The cap clips are fragile and I doubt would hold well without the adhesive.
Pulled the cap, drilled it, ran the wires(10amp fused) to the jumper posts and glued it all back together with Black RTV adhesive. The cap clips are fragile and I doubt would hold well without the adhesive.
Last edited:
Spacetrucker
New member
This what I use so go to his home page. gnipsel.com. They fit great and made to replace the old gages. ....
Similar threads
