• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. W

    What lights will work with the Can-bus system? How do I know?

    GDoc, The Show Chrome (from Big Bike Parts) requires that you drill a hole in the trunk lid in order to install the wire. Also, the installation requires that you tap into the 5-wire wiring harness on the left side near the taillight, and also the right side turn signal wire. Here is a link to...
  2. W

    Cruise Control Headache (RTS) - Goes ON, but will not engage! Any ideas?

    I had this happen when I tried to add a lighted license plate frame. It even put it in limp mode.
  3. W

    What lights will work with the Can-bus system? How do I know?

    I'm not at all sure how it could be a brake lights issue since the error code shows up while driving with no brakes on for miles. I have done a little research and will be adding a relay/fuse box to handle the accessories.
  4. W

    What lights will work with the Can-bus system? How do I know?

    I have a 2016 RT-S and would like to add some lighting. I bought an LED lighted license plate frame with brake and running lights, and when I connected it to my tail lights and existing license plate light, it (eventually) gave me an error code, and disabled the cruise control immediately. Does...
  5. W

    2016 Spyder RT-S has a misfire and dumping gas. No codes, uses gas very quickly.

    It sure was a learning experience. I only wanted to fix a misfire. The thing that threw me was the gas consumption and the raw gas smell. I would have simply changed the plugs and tried it except for the insane labor to do it. So I pulled the injectors for testing while in there. I guess having...
  6. W

    2016 Spyder RT-S has a misfire and dumping gas. No codes, uses gas very quickly.

    They are in fact those colors. Thank you.
  7. W

    2016 Spyder RT-S has a misfire and dumping gas. No codes, uses gas very quickly.

    I changed the fuel filter, the air filter looks like new. The codes I am getting are P2620, P2621, and P212C These are TPS codes, and I am certain that I must have swapped the two identical looking connectors, one of which goes to the TPS sensor. I am betting that the other one is a second...
  8. W

    2016 Spyder RT-S has a misfire and dumping gas. No codes, uses gas very quickly.

    UPDATE: I got the new plugs in with the heat compound and dialectric grease. I had the injectors tested and cleaned. The tech said they did not need it, they were fine. I got it running today and it's running on all 3 cylinders. It went into limp mode with several error codes, so that will be...
  9. W

    2016 Spyder RT-S has a misfire and dumping gas. No codes, uses gas very quickly.

    I am new owner of a 2016 RT, so the 1330 engine. I bought it as is. It has 5,500 miles, and had not been used very much in the last year. The bike has basically sat since last fall. The old owner claims that the bike run fine just a few days ago. I have my doubts about that. The engine starts...
Back
Top