• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. DickB

    Codes C006C & C0063 - Anyone have a source for a Ryker Rally Steering Lock Tool? Or a DIY alternative?

  2. DickB

    Codes C006C & C0063 - Anyone have a source for a Ryker Rally Steering Lock Tool? Or a DIY alternative?

    If you want the tool: https://leadersrpmshop.com/can-am-new-oem-spacer-529036476/?srsltid=AfmBOopQk6D2rPlhPObd-fC8aE25L-KM8_tErHQqcKT533k4lDia0-ZR I've purchased parts from Leaders - they can be a bit slow.
  3. DickB

    Codes C006C & C0063 - Anyone have a source for a Ryker Rally Steering Lock Tool? Or a DIY alternative?

    You'll not be able to tell if you need the Steering Update Kit by wiggling. The Service Bulletin explains the issue. In my case, I could tell the SAS was bad because I would rezero it, ride, and then find that it was off by 4-5 degrees. I'm not sure that you can tell anything from the yaw rate...
  4. DickB

    Codes C006C & C0063 - Anyone have a source for a Ryker Rally Steering Lock Tool? Or a DIY alternative?

    It may be the yaw rate sensor, it may be the Steering Angle Sensor (SAS). You may need the Steering Update Kit called out in this Service Bulletin: https://static.nhtsa.gov/odi/tsbs/2020/MC-10181946-0001.pdf The issue is that the SAS and yaw sensor readings do not agree. The SAS says you are...
  5. DickB

    Desperately seeking a way to save and keep my 2014 frunk lid when I trade the Spyder in - any suggestions?

    Go here: https://epc.brp.com/ and look up the part number for the frunk lid. Do a search on the part number. I replaced over 20 parts on a damaged 2014 RSS with both new and used parts using this method.
  6. DickB

    Any tips on the process of replacing the Old/malfunctioning ECM on a 2010 RS with a New ECM?

    Great news. Nice job.
  7. DickB

    Any tips on the process of replacing the Old/malfunctioning ECM on a 2010 RS with a New ECM?

    Yes, my thinking is that the DESS is indeed a separate entity, so if you are using your existing keys and DESS unaltered it might work. But one test is worth a thousand guesses.
  8. DickB

    2011 RT Won't Start - switch was loose, so I glued it in, could this be the problem?

    From the 2010 service manual - yellow/pink to the ECM.
  9. DickB

    Any tips on the process of replacing the Old/malfunctioning ECM on a 2010 RS with a New ECM?

    Why do you say that the salvage ECM cannot be tied to your existing DESS module? (I don't know if it can or can't.) Is there a way to set a DESS module to programming mode using BUDS?
  10. DickB

    RTS 2015 won’t start after installing new gauges/dash unit - any ideas?

    If they have what Can Am calls an "All Dealer License" for BUDS they should have the capability to help you; if they will is another question.
  11. DickB

    Check engine light - what to check?

  12. DickB

    Any tips on the process of replacing the Old/malfunctioning ECM on a 2010 RS with a New ECM?

    In a later manual (2014) there are several pages of instructions:
  13. DickB

    Any tips on the process of replacing the Old/malfunctioning ECM on a 2010 RS with a New ECM?

    The Service Manual gives detailed instructions for doing this. Do you have one?
  14. DickB

    RTS 2015 won’t start after installing new gauges/dash unit - any ideas?

    From my 2014 service manual: Multifunction Gauge Replacement NOTE: If the multifunction gauge is replaced, the engine may not start because of the security exchange coding. The gauge must be matched to the ECM for the vehicle to start. Connect vehicle to B.U.D.S. Refer to COMMUNICATION TOOLS...
  15. DickB

    Hooked the Battery charger to my 2018 RTL with wrong polarity; need help!! Any advice??

    You might want to get a battery charger with reverse polarity protection.
  16. DickB

    Check engine light - what to check?

    Go to 3:20 in this video:
  17. DickB

    Does anyone still make a Luggage rack for RS Spyders?

    My 2014 RSS came with a passenger backrest. I virtually never carry a passenger, and I didn't like the looks of the backrest unoccupied, so I made this mini rack out of aluminum. Aluminum is probably not sturdy enough for a luggage rack, but a machine shop could implement something in steel. The...
  18. DickB

    Any suggestions for creative use/mods/add-ons for the dashboard gauge plugs?

    I'm going to suggest that your RT might have connectors for the optional gauges in place, as I don't think it would make sense to have a separate wiring harness for those options. USB ports don't draw much current. It would be simpler to use those connectors rather than run separate wiring to...
  19. DickB

    Any idea on which way the wires go on the Fog Light Switch?

    This is from the 2014 RT Service Manual: -
  20. DickB

    Is there anyone who can Turn off DESS in Wisconsin?

    When I start BUDS I get this screen and have to select Engineering to get Megatech functions. What I find interesting is that my Engineering license is still active. Is it connected to my All Products Dealer license, which is still valid, somehow?
Back
Top