• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. P

    Just had Recall Sprocket fitted, now it's making noises - any ideas?

    Thanks for all your replies. I will try the lube first & then maybe adjust the alignment & experiment with the belt tension. Not much faith in my local Dealer.
  2. P

    Just had Recall Sprocket fitted, now it's making noises - any ideas?

    Thanks Gwolf,after I posted ,same thing I was thinking ,belt done 45th Kys,might bed in on new pulley,belt looks good,no vibrations at speed,smooth all through the gears changing up or down,seems to be riding on outside edge of new pulley,but about credit card gap on rear pulley on the inside.
  3. P

    Just had Recall Sprocket fitted, now it's making noises - any ideas?

    Just had the recall sprocket replaced, there is now noise coming from the sprocket at low speed in 2nd gear. Cruising at highway speeds, there's no noise & no vibrations. Should I be concerned? The noise was not there with the old sprocket; belt gap is good on the rear sprocket & riding on the...
  4. P

    Rough Idle on startup, settles once warm - any ideas?

    Peter it was Jase, done about 15 th kays since installed, will be getting the 45 th kilometers service done shortly, plugs & fuel filter replaced. lnteresting to see if anything changes. Thanks for the reply.
  5. P

    Rough Idle on startup, settles once warm - any ideas?

    My 2019 F3 Ltd is idling rough on startup, settles down once it gets up to running temperature, but rev counter needle still fluctuates between 800 & 900 revs, bike has a stage 2 tune in it, when hooked up to diagnostic tune reader there's no fault codes. Should I be worried? Done 40000 Kays...
  6. P

    Where do you put your phone????

    In the top box & blue tooth it to my Seina head set ,while also charging it through SBS port,also use Siri to voice command it.
  7. P

    Is this Belt adjustment OK? Comments welcome.

    Thanks Mike, will see if I can find it.
  8. P

    Is this Belt adjustment OK? Comments welcome.

    Thanks for the reply’s all, it is a 2019 F3 Limited with 35000ks. The front sprocket's been checked by a dealer, now waiting for replacement. Will probably have to re adjust it after sprocket replacement, not much faith in the dealer where I bought it.
  9. P

    Is this Belt adjustment OK? Comments welcome.

    When I adjust the belt it wanders from 1 credit card gap to 2 depending on where the rear sprocket is when rotating it, riding it every thing is normal with no harshness. I have a belt tensioner, it has not always been like this. On previous adjustments, the gap stayed constant. Your comments on...
  10. P

    Is this Belt Noise from Left side of engine normal? Goes away when warmed up?

    Thank you for the reply. I am talking about when the bike is first started, not on the move. It comes from the engine when cold.
  11. P

    Is this Belt Noise from Left side of engine normal? Goes away when warmed up?

    Belt type noise coming from my engine left side, goes away when it heats up. Never noticed it before, is this normal? John.
  12. P

    How much oil should drain from Trans plug at Oil change?

    On the Transmission oil drain, how much oil comes out? I'm only getting about an egg cup full, is this normal?
  13. P

    Hate to be a party pooper but...

    After riding 2 wheels for 55 years,had a crash,6 weeks in hospital,time for 3 wheels,took to the Spider like a Duck to water,maybe being a Plant Operator helped,Diggers in particular require soft hand operating,probably can get through the twistis quicker than when I was on 2 wheels ,ride 2 up...
  14. P

    What's the correct oil capacity for a 1330 motor?

    Maybe I should change my mechanic? He only changes the engine oil, reckons the amount that comes out the transmission plug is not worth worrying about. He likes to change the oil straight away after you ride it in; puts the oil in; lets it idle for a few minutes; then checks the oil on the...
  15. P

    Madstad Windshield

    Thanks Pete, that is what I wanted much appreciated. John
  16. P

    Madstad Windshield

    Pete ,I am swaying towards the F4 21” hope I can see over the top of it ,would it be possible to give me a measure height from the top edge of the Dash to 21 “ on your tall windshield,hope this makes sense. John
  17. P

    Madstad Windshield

    Thanks Pete,will also look at theF4 thank you John
  18. P

    Not yet a Spyder owner

    You get used to the body roll after 3000 KYS, now mixing it with my old mates on their motor bikes. I ride the twisters a lot, getting in the right gear for the corners much like a motorbike, button off going in & power out, I was able to follow an experienced Spider rider in our club which also...
  19. P

    Madstad Windshield

    My 2019 F3Limited with Screen,suits me fine very little buffing I am 5Ft 4,When my wife rides with me she is getting a lot of wind buffing,she is 5Ft, thinking of getting the 20inch Madstad screen,still want to look over it,open to all suggestions thanking you. John
  20. P

    Do Short Reach Handlebars come with cable inserts?

    Thanks PW2013STL & JP58, Going to order them today. Fitting looks pretty easy. Jonn
Back
Top