• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. NM Wrench

    Ryker brake light “stuck on” issue - Anyone else? Any fixes?

    Brake light It is a brake pedal adjustment take it back to the dealer
  2. NM Wrench

    Handlebar orientation, ryker

    You can rotate them but you have to drill them to get the controls to orient them correctly. There isn't any excess on the harness
  3. NM Wrench

    FOBO Help

    When I got mine I used my old phone then I purchased a pixel 2xl and it would pair with my new phone. Paired with the old one then it worked with my new one. I was told they were having trouble with the new phones. Bought minds 3 or 4 years ago play the US national security
  4. NM Wrench

    HowTo: Removing panels

    Does or has anyone removed the large panel below the colored panels? I need to to access the parking lock cover. I want to replace it with a new cover. Thanks
  5. NM Wrench

    Sport grips DIY install?

    Use a small screwdriver and work under ground. Lift gently and squirt alcohol down the inside of the grip. Twist and it slides right off.
  6. NM Wrench

    Lighting on the Rally

    I got Lamont's LED's They are awesome!
  7. NM Wrench

    Sway Bar

    Whole front end has to come off including the radiator
  8. NM Wrench

    Handlebar rotation

    I did the Handlebar rotation yesterday and am a little disappointed. It went well but after inverting and rotating 180 degrees the wire hold down and drainage holes have ended up on the top of the bars. I am now looking for some small rubber plugs to fil the holes before spending a hundred bucks...
  9. NM Wrench

    Installing Big Bike Parts Electronic Fuse Block 13-311 in 2014RT

    Yellow Wire When I installed mine I don't have any gauges anymore so I tapped into the red wire from one of them which is a switched power wire. Hope that helps!
  10. NM Wrench

    Razor Trailers

    We looked Hi we looked at them when we were going to buy a trailer. We contacted them and they are built to order and they close for the winter and we couldn't get one in time for Spyderfest so we went for a droptail trailer and are very happy with it. It folds so we can store it in our garage...
  11. NM Wrench

    USB Port for passenger

    Someone Has I have a member of our club that installed one for his wife. If you look on the left passenger grip up near the top you will find a circular plug. (That is left as you are sitting on the bike). This is a perfect place as you don't need to cut any holes to install it.
  12. NM Wrench

    FUNK HELP

    Mine Does Hi Bob, I also have a 14 RT-S and mine has an electric Frunk release. LOL I have to admit though I installed it myself with BRP parts. Mine works flawlessly
  13. NM Wrench

    Extra circle in Fog Light

    Lights That circle is for lights that are required in Europe not the US. That is the reason there is no light there
  14. NM Wrench

    Where should I tap into to get switched power for the FZ-1 Fuzeblock?

    Used used this Hi when I did mine I tapped into the switched wire for the gas gauge as the gauge was no longer there. It works great!
  15. NM Wrench

    My newest farkle and maybe the last

    Nice job! Hi I have the same voltage guage but have never seen that clock! Where did you get it? I would like to replace the one I currently have with one like yours!
  16. NM Wrench

    FOBO Question

    Yes. I have had for a year without any problems Sent from my VS990 using Tapatalk
  17. NM Wrench

    2015 Rt limited

    My 14 is 80 ft. lbs. Sent from my VS990 using Tapatalk
  18. NM Wrench

    Cleaning & detailing the Black parts of the Spyder's body Area's?

    Yes Lamonster has a black cleaner. It works awesome. Makes it look like new Sent from my VS990 using Tapatalk
  19. NM Wrench

    LED reverse lights?

    I got the turn signal bulbs here Here is the link I used for the turn signal bulbs https://www.superbrightleds.com/. I got the back up bulbs from a vendor on the home page here.
  20. NM Wrench

    LED reverse lights?

    Yes Hi, Yes I have changed the reverse and also the turn signal bulbs in addition to the headlights and fogs. So all of mine are now LED's. Mine is also a 14 RT-S
Back
Top