• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. M

    Re : I fix the PO174

    I just finish changing the valve cover gasket. When i remove the throttle body i can see the valve look what it look like it have deposit carbon. 6 month a go i put some sea foam in it maybe not enough they did remove carbon but maybe half of the valve so the valve it not closing tight give a...
  2. M

    Re : I fix the PO174

    Hi, Is this could be relate to P0174 ? Lean condition ? Anyway i will put new gasket , and the same time checking the valve.
  3. M

    Re : I fix the PO174

    Hi, I have some pictures of the flange intake. And my check engine light is always there. But my P0174 is intermittent.
  4. M

    Re : I fix the PO174

    I call the dealer order new Flange intake gasket 420 267 150 (N/A) maybe the one i have on my 2010 PE was defect. new part 420 267 151
  5. M

    Re : I fix the PO174

    I have not thinking before that because the rubber looking good , no crack, it's w hen i spray the boot with sea foam a see tiny bubble , so i move the throttle left to right , tiny crack appear , i take flat screw driver when i push on crack it pass through. On the video it was larger , i pass...
  6. M

    Re : I fix the PO174

    Yes that's the throttle body left side of the bike.
  7. M

    Re : I fix the PO174

    I find something else Hi, I find something today and it's maybe the cause of my P0174. For those with P0174 watch this.
  8. M

    Re : I fix the PO174

    Not fix yet Hi, me again. After replacing the hose the check came back 80 miles later. So i turn around and go back home. Near my home , my eyes start itching and was smelling gas a lot. As soon i arrived , i let the bike running and remove all the panel too find the smell, could not find...
  9. M

    Re : I fix the PO174

    Definitively, resolve my p0174. I change my 2 hose throttle body to map. No more check engine and no more code. I use temporary 2.8mm inner ,i will look for 2mm thick also, to prevent collapse of the hose when hot the hose come soft.
  10. M

    Re : I fix the PO174

    Hi, everyone My brother start to taunt at me with my P0174 lean bank 2 , that i can't repair my spyder myself without going to dealer to be plug on B.U.D.S. He said exchange your trouble hard working spyder for an harley ,and also you have an harley look guy :doorag:, (tattoo,ear ring...
  11. M

    Re : I fix the PO174

    Hi, everyone We are back from vacancy , back to job no time to write here. On vacancy for 6000km check engine came on a couple of time and went out. On the trip I decide to remove the canister at the hotel and some shopping at AutoZone for parts. Check engine stay on but no more error code...
  12. M

    Trip travel to smokies

    Hi, I had leave Montréal saturday for Nashville, Smokies, Cap Hateras and Virginia beach. I travel with my daughter, my brother and her wife and 3 more friend. They are on 2 wheel so i'm pulling the trailer for the group with my RTS 2010. Before leaving i decide to cut my windshield from...
  13. M

    Shorter windshield

    Hi, Bob I cut mine to 21" i really like it. I cut making some round curve edge to edge and leaving the wide. Look on youtube will give you a idea. And you finish with sand paper for the edge. I buy this to put on my dremel. 6-in-1 High Speed Steel Circular Saw Blades for Electric Grinder...
  14. M

    2010 RT Windshield Problem

    Hi, I have RTS 2010 replace motor windshield assembly last year no warranty but BRP give the part and install by the dealer 45 minutes. This summer i decide to cut my big 27" windshield to release some stress on the bracket and giving me some fresh air and cut it to 21". I'm very happy with...
  15. M

    I fix the PO174

    Hi, Maybe two month ago i buy a new set of spark plug and wire. I install it the bike seem to running well my feeling. After maybe 2000km check engine and P0174 appear last week. I read the manual shop trying to fix the problem. After testing purge valve and some. I had think what it was...
  16. M

    Clunking sound in front end

    Maybe with some photo Hi, I will use some of the spyderlovers photo for Thrinsag. Look under the lower control arm suspension. That it under the plastic cover and you should see this. And tight both side bolt upper and lower and mine too upper was loose and making clunck sound. If you...
  17. M

    Elka shock

    Thanks for the hint. If it work it will be better than original 2010 with 48 000km on them. They are really soft even at 5. I will see when i receive it. I will go two week in the smokies with trailer and two up in august. I want better shock with all the weight on the bike. It was ok the two...
  18. M

    Elka shock

    Hi, I buy this set of Elka shock it was on RT 2012 and i want to put these on my RT 2010, do i have something to do . There's no Elka sticker on it. No serial. No specification. . For 140$ must be a good deal. Looking good. Any suggestion
  19. M

    Video of the windshield shaking

    It will rain here for weekend so i will look further about the mechanism. When i move it by hand left/right it feel solid.
  20. M

    Video of the windshield shaking

    Not in miles but in km. So 30 km/h = 18 mph It's brand new from last year just storing for winter and this summer i have around 1200 miles with the new part and it still shaking. I remove some tupperware , to see where the problem find nothing. But with the shield all the the way up does not...
Back
Top