• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Lobo

    Shimmy

    Decided to check tire pressure. I hadn't thought to check after picking it up from the dealer. Front were at 16 psi. Took them to 20 psi. Rear was at 24 psi. Took it to 30 psi. Went for a short ride. Didn't feel the shimmy, though not on the best of asphalt. After we get through the...
  2. Lobo

    Shimmy

    I have a 2012 RT A&C SE5. I recently had the rear tire replaced. The dealer did a laser alignment and said they did Nanny resets. A shimmy from 40 to 48 mph started in 2nd and 3rd gears. Most of the time it is minor but sometimes it is heavy. Especially 40 - 44 mph. Took it back to the...
  3. Lobo

    Crunching gears going into 1st & reverse.

    My RT still did it a couple of times on my last ride. I'll have them check it again when I go for another service. Mine happens on flat surface. My driveway is sloped, but have not noticed it happening there. Checking the TPS must not be on their list of things to check. I guess we need to...
  4. Lobo

    Crunching gears going into 1st & reverse.

    I have my RT back home. Yeah! The TPS had to be reset!?
  5. Lobo

    Crunching gears going into 1st & reverse.

    It still grinds. Just can't determine why. At this point they do not believe it is the cluth or trans.
  6. Lobo

    Crunching gears going into 1st & reverse.

    It's been over a week and the dealer nor BRP have any idea what the problem is. Everything tests as OK. I need some wind therapy. This is very frustrating.
  7. Lobo

    Crunching gears going into 1st & reverse.

    Had to wash the Mrs. car, so did mine too. I agree. Drive more. I average 2000 miles per month.
  8. Lobo

    Crunching gears going into 1st & reverse.

    Just had the oil changed at the dealer. Oil level is fine. They are thinking it is the shift actuator. They are still looking.
  9. Lobo

    Crunching gears going into 1st & reverse.

    Jumped on my 2012 Spyder RT this morning to run some errands. From a still position, after putting the spyder in 1st gear, I hear gears grinding. After a few seconds, that stops and the engine acts sluggish like there is water in the gas. At 20 mph everything works fine. The grinding happens...
  10. Lobo

    RT rear tire replacement and lazer alignment

    Doing it right goes without saying. The dealer that I have to deal with seems to be high priced on everything. Does a rear tire change require alignment? Can I wait until October at the Maggie Valley Rally?
  11. Lobo

    RT rear tire replacement and lazer alignment

    I'm having a new rear tire put on at my local dealer. What price should I reasonably expect to pay for the alignment?
  12. Lobo

    rt rear tire

    Rear tire change price Red Line Powersports in Myrtle Beach, SC just quoted me 3 labor hours at $300 to change the rear time on my 2012 RT. Guess I need to call some other dealers. The closest is 2 hours away.
  13. Lobo

    Front tires worn

    So, what tire would you recommend?
  14. Lobo

    Wheel lug nut size?

    Thank you all for the replies.
  15. Lobo

    Wheel lug nut size?

    2012 RT. I have been through the service and owner manuals and have not found what size the lug nuts are. I have a four point lug wrench and none of them fit. Does anyone know what size lug wrench I need?
  16. Lobo

    Rough idle

    I put a dose in about 600 miles ago. Waiting the specified time to put another dose. At a stop is the only time I notice the rough idle. When riding I don't feel it. Thanks for the reply.
  17. Lobo

    Rough idle

    2012 RT. When sitting still, my idle is rough. Is that normal?
  18. Lobo

    Is there a Tupperware removal manual??

    How to save or find How can I save this video or find it for later use?
  19. Lobo

    2012 RT Reverse noise

    How did you resolve the problem?
  20. Lobo

    2012 RT Reverse noise

    My 2012 RT has starting making a "groaning" sound when in reverse. Any comments or suggestions, please.
Back
Top