• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Jetfixer

    Alignment time - got a Surprise on the bill!

    It's nice to hear about a dealer doing the right thing for a change!
  2. Jetfixer

    Installing Rear view/backup camera - what wire & where to trigger it?

    Rather than mess with the bikes' wiring, why not consider installing a system such as the Innovv N1Pro? This is a dashcam system that also gives you Apple CarPlay, Android Auto, AND can be used as a rearview camera display. I've installed this system on a 2021 F3L, and it works very well...
  3. Jetfixer

    Got Limp & Codes U0073, U0122, U0100, C0060, P0556, P0504, U0101, U0128, U0295, U0303

    What year, what codes, etc. Can't help without more info.
  4. Jetfixer

    My very old Garmin GPS is not usable in sunlight, will newer ones work better?

    Check out the For Sale section here. There is at least one Zumo XT2 for sale. One even comes with a Kradellock. I have the Zumo XT2 on my RTL and it is very much sunlight readable and waterproof. One of the features I really like is the ability to download what they call Birds Eye imagery. It...
  5. Jetfixer

    Just had my 1st service done - they used 4T 0W40 synthetic oil - anyone else?

    It's Can Am oil, just wrong viscosity for a Spyder engine/transmission.
  6. Jetfixer

    Got Limp & Codes U0073, U0122, U0100, C0060, P0556, P0504, U0101, U0128, U0295, U0303

    The common point for CANBUS issues is the cluster. Check the connectors on the cluster. ECM is located on the left side below the mirror.
  7. Jetfixer

    F3T died rapidly after sitting 2 months, now no start - any suggestions?

    Drain the fuel, put in a tank of fresh non-ethanol fuel. Give it time to get through the filter, lines, & injectors. I think you'll solve your problem. The fuel may only be 2 months old to you, but how long might it have been sitting in the gas stations' tank?
  8. Jetfixer

    Looking for info/advice from those who have RT Replacement Shocks...

    I have the Elka Stage 2's in all 3 positions and love them! If you go with other shocks most vendors will want a lot of info about weight and type/skills of riding. That said, they will get you into the ballpark of ride settings. Don't be afraid to tweak their default settings until you get them...
  9. Jetfixer

    What are these 'extra wires' hanging out the back of my Spyder?? Your Thoughts?

    Those are Positaps on the ends of the wires. They are absolutely NOT part of any original wiring or Can Am accessory wiring. Some previous owner must have had some accessory installed, most likely lighting. judging by their location, check to see if your right side saddlebag has the original...
  10. Jetfixer

    What is this strange noise?! Sunday Riding...

    Learn to use it as a speedometer. The faster you go, the louder and higher pitch it will get...
  11. Jetfixer

    You will LOVE or HATE this - How to open your locked Frunk without the key!

    If the choice was being stranded somewhere or potentially having to replace a cable, I know what I would do. Thanks Martin!
  12. Jetfixer

    1330cc Anyone else had this 'gear change fail' or 'hesitation/vapour lock' problem? Ideas?

    Have you checked the oil level?
  13. Jetfixer

    2016 Spyder RT-S has a misfire and dumping gas. No codes, uses gas very quickly.

    If you ran it with the frunk removed, then you also must have had the connector removed for the air temp sensor. Doesn't make computer happy.
  14. Jetfixer

    Anyone got a valid reason for the High Torque settings on the brake rotor?

    I don't have a problem reusing those bolts as long as the threads are not damaged and you clean out all the old thread locking compound. Also not a bad idea to run a tap through the holes to clean the mating threads out also.
  15. Jetfixer

    How to disable DESS using BUDS? Any Step-by-Step Procedures?

    I (and a few others I know of) will normally charge $50 to do a BUDS/BUDS2 scan, which "could" include disabling DESS.
  16. Jetfixer

    What sized screw for the License plate?

    Can't remember the screw size exactly, but they self-tap into the plastic. They don't go all the way through.
  17. Jetfixer

    Refusal to look at my 2015 RT-S by a Can Am Dealer!

    What I don't understand is why doesn't BRP allow those of us that do service and repair work on the side (on all model years) to become "authorized" service providers? It's not like I'm taking money away from a dealer if I choose to repair an older model that they won't support any longer. And...
  18. Jetfixer

    Looking for a male connector to fit this? Need to charge GPS!

    That plug is for the optional fog lights switch.
  19. Jetfixer

    Found Engine Serial # on 2013 ST, but CHP does not agree! Any advice?

    Good job! If that's not good enough for them, you could get someone with BUDS to print out a report for you. It shows engine ID also. See below. Image edited to protect my customer's VIN!!
  20. Jetfixer

    Got a 'new' Strange Noise at Low Speed - any thoughts on what to look for?

    Could be a wild guess here, but do you have a belt idler installed? I've seen a few of the factory installed idlers out of alignment. They can be far enough out for the side of the idler arm to rub on the belt. This "could" cause the moaning sound you describe as the belt would be rubbed like a...
Back
Top