• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. kdp1308

    braking in new brake pads

    I have the instructions from Baja Ron that came with my new pads. If you want, I could type them in. They are essentially the same as what is listed on EBC's web site: https://ebcbrakes.com/articles/motorcycle-bed-in/ But like the previous poster stated, if you are using a different brand, try...
  2. kdp1308

    Have you had an ECU Flash? How long did it take? Any good?

    When it was pointed out to me that the Powervision was now available I looked and it does list some Spyders if you use the vehicle fitment search. They only list the RT for 2016-2017 and the F3 for 2015-2018. So I emailed them about the availability of one for my Spyder (2013 RT-S) and this was...
  3. kdp1308

    998cc A “little” winter maintenance.

    This is more what what it looks like without plastic.
  4. kdp1308

    998cc A “little” winter maintenance.

    Trying to rotate picture. Not having any success.
  5. kdp1308

    998cc A “little” winter maintenance.

    It does take up the whole garage. It would be easier to tell you what I didn’t do! The main things were the valve covers were leaking. So cheching the valves made sense. It was leaking antifreeze. I was hoping for a hose clamp but of course it was the water pump. They couldn’t have made...
  6. kdp1308

    998cc A “little” winter maintenance.

    Finally ready to start going back together! Hopefully it will be all done by spring.
  7. kdp1308

    Have you had an ECU Flash? How long did it take? Any good?

    I just asked Steve about the 89t rear sprocket and this was his reply, "We started to look into allowing sprocket changes, but never finished. Personally, I think the higher gearing of the 79T is better. Just add power to match the 89T acceleration. And I think a better mod would be for the...
  8. kdp1308

    Balance rear tire????

    I took my old wheel and tire and the new tire to Discount Tire. I left the hub and disk on it. They mounted it with no problem but said they couldn't balance it. It is a General Altimax. I just put it on and have had no problems, runs smooth.
  9. kdp1308

    2013 Rt Limited

    Sorry, try searching for can-am delrin bushings. Same company. The company name is Machined Integrations. Their ebay seller name is machinedintegrations. Their web site is www.customatvutvparts.com. The bushings fit tighter on the sleeves than to oem ones but are very smooth. I am...
  10. kdp1308

    2013 Rt Limited

    I have a 2013 RT-S. I’m pretty sure they are the same. The bolt should be a standard flange bolt. There should be a chrome plated sleeve that goes inside the bushings. The bolt should not see any wear, but two of mine were worn. Which tells me the sleeve was turning, but shouldn’t. In 2014 they...
  11. kdp1308

    What happened when I took the Spyder in for and alignment.

    And the saga continues! I am going thru the Spyder over the winter and while installing new brake pads I figured out that some of the A-arm bushing are shot. I wondered why it didn't seem to handle a whole lot better after the alignment. I had a good 1/8" play on the lower right A-arm. I...
  12. kdp1308

    Replacing horn with air horn, relay or no relay?

    I couldn't find anywhere how many amps the horn draws. Thanks, Lew. The kit that spyderpops sells doesn't show a relay. Somewhere I saw that the spyder had a relay for the horn but looking at the wiring diagram didn't show any. My horn is mounted inside the frunk so I will have to use some...
  13. kdp1308

    Replacing horn with air horn, relay or no relay?

    Like the title says, I am replacing my stock horn (13 RTS) with a Wolo bad boy air horn. Do I need to use the supplied relay or not? Thanks, Keith
  14. kdp1308

    Dynojet Powervision or Monster Fuel Injection?

    I know there is a thread on ECU flashing but it has kind of devolved into whether a stage II flash is worth it. I want to do something with my Spyder by spring (2013 RT-S). I kept hearing that Dynojet was coming out with a Powervision for the Spyder but had about given up on that happening...
  15. kdp1308

    Las Vegas ryders needed!!! Free dynojet equipments.

    I guess they do list some. I had to use their vehicle fitment selector to find them. It looks like they are only for new 1330 motors not any for the 998 motor. The first post says they want a 13 or newer RS. If I am not mistaken the 13 RS had a 998 motor.
  16. kdp1308

    Las Vegas ryders needed!!! Free dynojet equipments.

    A while back on a thread about ECU flashing someone said to wait and dynojet was coming out with a powervision for the Spyder soon. I keep checking but I guess they aren't done yet. Is it going to be out soon? If it is not within a month or so I am send my ECU off to get flashed. I want to...
  17. kdp1308

    Fuel filter part numbers, save some money!

  18. kdp1308

    Fuel filter part numbers, save some money!

    It is a 2013 RTS. I did find various fuel filter cross reference sites but BRP numbers don't work. If you want to use the Oetiker clamps you need a special tool. The filter I have is all aluminum and looks like most car filters only smaller. I think they use them on many small engines. It...
  19. kdp1308

    Fuel filter part numbers, save some money!

    BRP # 709000100 Walbro # 125-199 Wix # 33095 The BRP part number at least for my Spyder is 709000100. It actually uses 2. One goes between the charcoal canister and the purge valve. I didn't replace that one. It should only see some gas vapors. BRP used this filter on many different models...
  20. kdp1308

    $160,000.00 Spyder

    Awesome This is great. How about some more pictures, a list of mods you did to it, some of the stories about the build, etc. :clap:
Back
Top