• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Snoking1127

    Latest BRP Safety Bulletins for Shaft Replacement (2019-12) and Shaft & Sprocket Replacement (2019-13) Recalls - Jan 2025

    Well I have a date for the recall work. Scheduled for March 4th for the Arizona one.
  2. Snoking1127

    Latest BRP Safety Bulletins for Shaft Replacement (2019-12) and Shaft & Sprocket Replacement (2019-13) Recalls - Jan 2025

    Doesn't your output shaft rotate the other direction making it stronger? :cool: It also points at the side of the road versus at the center line and traffic going the other direction.
  3. Snoking1127

    Are you using Tie down straps to secure a Spyder with e-track in an enclosed trailer?

    I use one inch aluinum angle iron under the deck of my aluminum trailer and 1/4 20 SS hardware.
  4. Snoking1127

    Are you using Tie down straps to secure a Spyder with e-track in an enclosed trailer?

    The ratchet strap over the rear tire is a bit of a pain to install. When I do the 1550 commute AZ to WA and WA to AZ, I put additional side straps on the rear wheel, and straps from eyes on the lower shock bolts to pads on the trailer deck. Belt and suspenders! I found that the Spyder did not...
  5. Snoking1127

    How many States require a Motorcycle Endorsement for Spyders?

    I took the Can Am sponsored course in Arizona in the fall on 2020 at age 76 and Washington would not honor it when I got back to Washington for the summer. So I took that same but slightly different course in Washington and got the three wheel endorsement on my Washington license. I then...
  6. Snoking1127

    My 2024 RT has developed a Vibration at 2700 rpm - anyone else? Any ideas of cause? Fixes?

    Does in happen in more than one gear at that same RPM. The 1330 engine is happier at RPMs of 3000-3200 plus. If you are pulling a little hard at 2700 that might be the issue. More of a shudder than a vibration.
  7. Snoking1127

    Latest BRP Safety Bulletins for Shaft Replacement (2019-12) and Shaft & Sprocket Replacement (2019-13) Recalls - Jan 2025

    I think I would like my dealer to do a few of these repairs before mine goes in for it.
  8. Snoking1127

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    I got the first letter for each of two my 2018's. Vin's are 67 numbers apart.
  9. Snoking1127

    What did you do to your Spyder today?

    I have had a dependable riding buddy for over 4 years. His daughter posted on a local Spyder FB page that her dad was in Arizona and looking for someone to ride with. I asked her where he was located and he was about two miles from my winter RV Resort. He is a retired LEO and rode on the job. We...
  10. Snoking1127

    What did you do to your Spyder today?

    What is your buddy going to be riding? That might be something to match up with.
  11. Snoking1127

    2020+ rear seat sloped down in the front - has anyone addressed this issue?

    I am thinking maybe the rear tabs are on the top of the place they are supposed to hook under. We will be checking on that.
  12. Snoking1127

    Please set up a forum area for Canyon models

    Yes it will be way too limited as to where one could ride it. And one could easily get in trouble going "down" into an area where the only way out is the way you came in. Don't even think about sand dunes!
  13. Snoking1127

    2020+ rear seat sloped down in the front - has anyone addressed this issue?

    My friend has just bought a 2021 RT Limited to replace their 2006 Honda trike. She thinks the rear seat is sloped down too much toward the front of the trike. Also that the backrest is vertical and not sloped back. Parked next to my 2018, both appear to be true. Has anyone addressed this issue? TIA
  14. Snoking1127

    Broken output shaft - Final Drive Belt Tension involvement?? Sept '23 BEFORE RECALL

    I will wait until the dealer has done a few before taking mine in. And my Washington State one will have to be done in May or June when I return.
  15. Snoking1127

    Please set up a forum area for Canyon models

    They should come with an off road recovery insurance policy, as a one wheel drive 1000 pound machine is going to easily get stuck. Would I stop and help, or laugh, wave, and continue my ride, as it would not work well on most Arizona off road trails. And in the NW where I come from most logging...
  16. Snoking1127

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    If is has less than 37282 miles it is covered.
  17. Snoking1127

    Please set up a forum area for Canyon models

    That will be a small group!
  18. Snoking1127

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    It Says "BRP will replace at no charge to you (parts and labor) the output shaft of the vehicles if your vehicle is below a specific mileage threshold." It says 2018 less than 37283 mi, Output shaft replacement required.
  19. Snoking1127

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    How far does the trike have to be disassembled to replace the shaft?
  20. Snoking1127

    What did you do to your Spyder today?

    Got the 8 ohm resistors installed and turn signal flash rate is steady and the correct rate.
Back
Top