• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. M

    Code P0340

    Got it! It too a little longer than a couple of minutes but the rag was used just like you recommended and I left the wire connected until it was out. A long pair of needle nose pliers came in handy too. Then I plugged the wire into the new one before installing and in she went! Definitely...
  2. M

    Code P0340

    Camshaft position sensor "Easy to replace yourself" Ok Joel, got in there today and got all the way into the loosing of the bolt for the sensor. As they say no guts no glory! Any tips on getting the bolt out without dropping it into the engine and then trying to get the new sensor back in...
  3. M

    Am/fm antenna booster?

    I have a 2016 RT LTD and as most have commented the radio reception leaves a lot to be desired. I was wondering if any antenna booster is available to possibly help with the reception?
  4. M

    After advice on pulling a trailer?

    I went with the Can Am Accessories hitch, much stronger than the BRP hitch. https://www.canamspyderaccessories.com/rt-trailer-hitch/
  5. M

    Running Trailer Wiring To The Battery on an 14 RT

    Want to do the same setup for my trailer plug. I have run the wiring from the battery back to the rear for the brake controller that I have mounted inside the rear top trunk. I already have the 4 pin flat along with the 2 extra wires for the electric brakes on the Timeout camper. I don't like...
  6. M

    Brake Controller Questions

    Thank you for your response. All of the locations that you suggested are preferable and if they have clearance and should be doable. Unfortunately a new work week is upon us and will have to wait until time permits. Will keep you posted on what I find out. As you stated, trailer mounting has...
  7. M

    Brake Controller Questions

    All of the locations that you suggested are preferable and if they have clearance, should be doable. Unfortunately a new work week is upon us and will have to wait until time permits. Will keep you posted on what I find out. As you stated, trailer mounting has its own set of problems, i.e...
  8. M

    Brake Controller Questions

    It is a Tekonsha Voyager® Electronic Brake Control, for 1 to 4 Axle Trailers, Proportional. It is activated via the brake light circuit with a sensor inside which increases braking force in proportion to the intensity of the stopping force generated by the tow vehicle. It has to be mounted in...
  9. M

    Brake Controller Questions

    Just got the TimeOut Deluxe with the added electric brakes. The dealer installed the brakes with a separate 2 pin plug for the brake circuit. Any ideas where I can mount the Brake controller on a 2016 RTL. Already have installed the plug & play harness from Can-Am Accessories (Pierre) which...
  10. M

    Ipod for an RT LTD

    Thumb drive ? Ray, What format is your thumbdrive? PC or IOS?
  11. M

    Installed Baja Ron sway bar

    Tall Jack Stands? Quick Questions: How tall were t your wheel stands? Where did you get them? Where did you place them when lifting the bike?
View older results
Back
Top