• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. G

    BajaRon swaybar/longer shocks - test ryde up to 13.000 feet

    which 400mm shocks did you use? Can you post a link from where you bought them? Thanks
  2. G

    I really think I need an F3

    Interesting that in position 5 some owners have found the brake pedal contacted the board. I no longer have my F3T but was one of the early adopters of the ultimate boards and I never had any contact between the brake and the board. I wonder if some manufacturing tolerances changed on the...
  3. G

    What Did You Do To Your RYKER Today?

    thanks. I just installed the RFY version as I had to wait for some additional bushings to reduce to a 10mm bolt size. I just got home from a short ride and they feel nice however I notice that the rubber bushings are already squeezing out from the eyelet even more than yours are. i notice in...
  4. G

    What Did You Do To Your RYKER Today?

    Replacement Shocks When you installed the new shocks were the ends wide enough to fit between the brackets where the shocks are bolted on? I got the RYF version and just looking it seems they are narrower than the existing shocks. Wondering if a washer or two on each side may be a good idea?
  5. G

    What Did You Do To Your RYKER Today?

    I just ordered these shocks and will play with the air as well. Keep us posted if you try changes
  6. G

    Red/Yellow Dots on Kenda Tire Sidewalls - Balancing

    I will check if I can spot an obvious mark on the rims but suspect that there are none and even if there are it could be inside where I couldn't see if. It would be interesting to know what BRP does or does not do, i.e. do they but the rims with tires mounted and balanced with weights or is...
  7. G

    Red/Yellow Dots on Kenda Tire Sidewalls - Balancing

    Thank you. Does anyone happen to know if the Ryker rims have the mark denoting the lightest point on the rim?
  8. G

    Red/Yellow Dots on Kenda Tire Sidewalls - Balancing

    I believe if a tire has a red or yellow dot on the side wall that dot should be aligned with the valve stem to minimize the amount of balancing required? I noticed on my 2019 Ryker the red dots on 2 of the wheels are NOT mounted anywhere close to the valve stem. The 3rd tire does not have a...
  9. G

    What Did You Do To Your RYKER Today?

    Chris have you ever adjusted the ride with the air pressure on the shocks. Looks like it comes from the factory with .4 MPI (approx 58 psi) and can be adjusted up to a max of .5 MPI (approx 73 psi).
  10. G

    2 Up Spring Questions

    I had the 2 Up Spring installed and wonder if anyone has any idea as to the proper setting to use for different weight, i.e. similar to the table in the owners manual for the regular spring? I am not sure if anyone has compared the standard Ryker Ace 900 spring to the 2 up spring but here is...
  11. G

    Ryker Axle Plugs

    I used the 1 3/4 vs 1 1/2 inch plugs for the inside of the wheels. A bit of a tight fit but they worked just fine.
  12. G

    2-up spring weights

    I jacked up my 900 Ace that had the 2 up spring installed and I have slightly over 6 1/2 in between the bottom of the max mount and the top of the fender so it would likely be over 7 in to the top of the tire. I adjusted the shock so that when I am on it I have about 2/3rds of that amount. Not...
  13. G

    What size is the Ryker's Final Drive Crush Washer/O-ring? Re-usable?

    Thanks Ron. I picked up the parts today and you are absolutely correct the part is an o-ring not a washer
  14. G

    Fender Touching A Arm on Full Lock to Lock Turn

    Fender Running on A-arm Update - BRP Comments I just had my ryker in for its first service. They advised that in discussing this with BRP that they are aware of the issue but don't have a fix at this point. Which I take to mean nothing will ever happen other than on future models. The...
  15. G

    What size is the Ryker's Final Drive Crush Washer/O-ring? Re-usable?

    Alternative Crush Washer I agree on not reusing these items however I thought if there was a source for a cheaper version I would buy some to have on hand. I had to wait for the final drive washer to be ordered in and I prefer to be able to do the work when I have the time. I know a number of...
  16. G

    2 Up Spring Install

    2 Up Spring Install Update I had my Ryker in for its first service (I did all the oil changes etc myself). I asked how much to install the 2 up spring. The dealer did not know as they had not installed one yet but said it would be a max of 2 hours of shop time. I just got off the phone and...
  17. G

    What size is the Ryker's Final Drive Crush Washer/O-ring? Re-usable?

    Does anyone happen to know the size of the crush washer for the final drive oil drain? It is a different part number than for the large oil drain and great drain. BRP price in Canada is $10.99 plus tax which seems high. Thanks. PS. Have people reused the existing washer with out issue?
  18. G

    2 Up Spring Install

    I bought the oem 2 up rear spring. Looking at the install decided I would check with the dealer as to the cost to install. They tell me they haven’t installed one yet but would do it based on 2 hours of shop time at their standard rates. Time wise that sounds reasonable to me. Thoughts or has...
  19. G

    Help Removing Skid Plate

    So wanted to get back and say I clean everything with degreaser and rinsed that all off. The leak was from the main oil drain plug. Put a torque wrench to and it just hadn’t been tightened enough by the dealership. It has not had its first oil change yet but I will be changing all the fluids myself
  20. G

    Ryker Rally Oil plugs access?

    Thanks. Do you re zip tie the wires or just leave them loose in the channel?
Back
Top