• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. jwulf74

    Tooling recommendations

    I have a set of pliers made specifically for pulling the pins. I think I may have gotten them at Sears. Pin pliers or something like that. ..can't remember the exact name but they off set the tips at about a 30 degree angle or so and the ends on each tip somewhat resemble flat screw drivers...
  2. jwulf74

    OBO and Nitrogen?

    I usually use the 80% nitrogen. No Fobo yet, but I do check the tires and every month or two I need to add some.
  3. jwulf74

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    That sounds like the vacuum hose issue on some of the older RT's. Under the throttle body are 2 small rubber hoses that dry out and crap and cause these types of problems. Most people replace them with higher temp silicone hoses. Might not be your exact problem, but worth checking.
  4. jwulf74

    PUNCTUATION is very important in life

    Psycho the rapist..... psychotherapist Let it snow....'le **** now :roflblack:
  5. jwulf74

    recall

    Mine went out on my 11....the wife's might be going out soon... that sensor has a plastic "D" in it and the plastic give out so the "D" shape hole becomes an "O" and won't hole grip the bar that moves the D to tell the sensor what gear it is in. When they go out it will intermittently through...
  6. jwulf74

    USB Outlet

    I don't have a video, but I made a template out if cardboard that the switch fit tight into and the aligned it around the round hole. Mark as desired and then I used a razor blade to cut it out leaving it slightly smaller and then shaving it down for a right fit.
  7. jwulf74

    Enclosed trailer questions

    I haven't been on in a while. Thanks for the pic. That helps a ton!
  8. jwulf74

    Enclosed trailer questions

    8ish X 14 sounds like about the smallest. Yikes. Thanks for all the advice everyone!
  9. jwulf74

    Enclosed trailer questions

    For those that have put Spyders in enclosed trailers, what size will fit 2? Will a 7x14 cut it? Is there a need to strap them down inside? Or just use wheel chocks that are mounted solid?
  10. jwulf74

    A Spyder of a different species (Drakan Spyder)

    Having had an LS2 in a GTO and now the LSA in the CTS-V, the Drakan looks like a winner to me. $100k seems steep for basically an engine, frame, shell and a couple of seats.
  11. jwulf74

    weird light issue - any thoughts?

    HMT I think stands for High Mount Trunk. It is the brake light from Custom Dynamics.
  12. jwulf74

    Easy Cure For Deceleration Exhaust Pop. No Parts Needed

    I have JT's intake and once I added the cat bypass mine started popping... freed the air up a bit too much I guess. I will have to try the throttle trick.
  13. jwulf74

    weird light issue - any thoughts?

    Yep, you got one.:2thumbs: Another member was talking about the same issue with the blinker and cruise so I pm'd them what I found incase they have a similar or same issue.
  14. jwulf74

    cruise control and signals???

    To the Op... I got mine figured out and guessing yours is something similar... On my 2011 the cruise would cut I signaled right. Basically it was due to the brake light coming on when I signaled. I found a bad ground wire on the harness to my HMT brake light. The ground not being hooked...
  15. jwulf74

    weird light issue - any thoughts?

    As I was about to give up and tidy up the work area, I noticed that the ground wire on the HMT harness was pulled out. It looked like it wasn't soldered or crimped in properly. I pushed it back in and the problems went away. Pulled it back out and they reappeared so since i can replicate it I...
  16. jwulf74

    weird light issue - any thoughts?

    I have an odd issue that is really weird. Not exactly sure when it popped up, but when I use my right blinker in the back both the brake and blinker flash alternating fast. The dash light blinks fast. When I put my right blinker on when cruise is on, it will kill the cruise, but probably due...
  17. jwulf74

    cruise control and signals???

    Mine started doing that this summer... left signal to pass is no problem, but when I signal right to finish the pass, the cruise shuts off. Happens every time. My daughter let me know that I have a bulb out in the back somewhere so I am hoping that is just something weird tied to that. I just...
  18. jwulf74

    Bullying on our boards will be dealt with when reported

    What doesn't kill you only prolongs the inevitable. ..nojoke
  19. jwulf74

    more gun control attacks

    Luckily here out in one of, if not the most, free state, we can open carry any where but the usual places like courthouses, schools and bars. Conceal carry with permit in all but the same. Long guns are no issue either. If it goes boom, we can have it. I CC everywhere but work where we have...
  20. jwulf74

    10 stupid gun quotes

    I would love a Barret 50...but you can get a good used car for what just a single shot bolt action costs...let alone the really nice semi-auto version..
View older results
Back
Top