• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. M

    replacing tail light

    Oh My Gosh! Have a '13 ST-S with BRP back rest & GIVI-35s. Started when I got home from work, three hours later, it's all apart, sun is setting. Tomorrow I hope to start the LED project. (LED bulbs & DIY GIVI lights) The tail piece, that the back rest anchors to blocks removal of rear lights...
  2. M

    Shoe polish on ST finish

    Harley Davidson offers a couple cut pieces that fit varied locations. I bought a front fender piece and cut it to fit behind each wheel of my Ram truck. Bet you could do the same thing once you polish the scuffs off using a glaze that has a fine abrasive properties, between wax & rubbing compound.
  3. M

    New to me - 2013 Spyder ST-SE5

    Wondering how did you set the wires to the saddlebags? Is there a quick disconnect in place? And how is it functioning after 6 months? I have found lights on eBay...
  4. M

    Headlight Bulb replacement on 2013 ST Limited

    W T F ? Why is this in the ST Section? DUHH!
  5. M

    Rear Shock - Adjustable Replacement??

    Doesn't Matter All ST models are virtually the same mechanically, the year doesn't matter they are unchanged within the 3 years of production.
  6. M

    How to mount accessories on ST handlebars??

    Finally... I got the RAM Mounts, the mirror hole mount was too close to the master cylinder. I couldn't get the GPS out from in front of the right mirror. Yesterday the Spyder Cuff arrived, today the J&M HBK03S mount arrived. The mount plate is reversed set on a 45degree angle, putting the...
  7. M

    Headlight Bulb replacement on 2013 ST Limited

    Wondering... How many hours will a tech charge? I have large hands wear a 3x glove... or do I take the fairing apart?
  8. M

    Options for radio

    Installing a CB Radio Wife is on me to install her CB, the J&M 2003 has an auxiliary input. Using a Lamonster Cuff, J&M Kawasaki mount, headset mounts in the helmet. She listens to Pandora, iTunes, local radio thru iHeart app. And we can talk to each other, other riders. As I save the photo...
  9. M

    How to mount accessories on ST handlebars??

    We have a ST-S with a SCSI hand brake lever. This makes mounting accessories a challenge. On the right side (throttle) we are planning to use a RAM 1" ball mounted in the mirror mount hole. This is where we will mount the GPS. Using other mounts will put the GPS south of the ignition, way...
  10. M

    How to mount accessories on ST handlebars??

    Still Looking... Upon the recommendation of parts guy we didn't try to lengthen the bars. The return spring for the throttle attaches under the bar end. We did buy a Master Cylinder Ball Mount and a XL pipe mount, both manufactured by Ram Mount. Neither worked, the Master cylinder holes are...
  11. M

    Best Streak-free WINDSHIELD Cleaner

    Old school here . . . Put an old wet T shirt, on the wind screen, let it soak, while you make coffee. Wipe the bugs off, then apply Turtle Wax.
  12. M

    Anyone know how to remedy Hyperflash?

    Zero value. . . I had one front, one rear. 4.5k didn't work, completely. They slowed, but not normal.
  13. M

    Thanks Guys and thanks BRP

    Don't understand Why BRP agreed to do the fix on ST models & not GS/RS models. Oh well...
  14. M

    Anyone know how to remedy Hyperflash?

    Resistors F & R Front Resistors on the GS were behind the instrument cluster, on top of the frame end piece. Ground was to the frame, behind the bars, under the lobster Tupperware. Rear were on L brackets I put behind the battery. These brackets held the run-turn-brake module, & resistors. I...
  15. M

    Anyone know how to remedy Hyperflash?

    Resistors are NOT required? Sorry, this is the first I heard of this new age remedy... Will the Hazard Hold solution work on all models? Or all models starting a specific year? I used resistor sets in the 2009 GS, it still hyperflashed.
  16. M

    Chrome inserts

    Nice Job! Think I will try that route first. Did you use Epoxy to glue the grills in place?
  17. M

    Fighting the heat

    Installed... Then GONE! I got both the right & left filler pieces. $95 + tax from the stealership, (who agreed to take returns if the parts were incorrect!!!) While installing the left side, I wrapped the front cylinder header pipe. Both used mounting places not in place on my 2009. So I...
  18. M

    Third break light, yes or no

    YES I installed one one our GS & ST, both above the license plate.
  19. M

    Right palm gets numb - will bar-end weights help?

    Gloves! CTS Stretches, Gloves, & use a throttle lock or cruise. I recommend ALWAYS wearing gloves, the first thing to hit the ground.... Hands, Head, & Knees... Protect Them.
  20. M

    Hello question

    Do you want to keep them as friends ? As if you were in court... Only answer the question that is asked of you. If the buyer wants it bad enough and the seller wants to sell... Sounds kinda like getting in middle of another couples discussion... someones gonna loose, it could be you!
Back
Top