• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Haze

    Random thought for the day

    Wow, Sorry to hear of your accident. Been there . Done the accident thing. Rest and recuperate completely... Will see you at ryding season.
  2. Haze

    Replacement Gas Cap for F3T?

    F3 Gas Cap Replacing F3 gas cap. Info borrowed from Facebook, Thank You to Bob Nevitt. I have never liked the hard closure the stock F3 gas cap. Project: 2017 F3T, Change the locking gas cap to non-locking. You have several options. There are caps from Customspyderworks and Lamonster Garage...
  3. Haze

    Looking for a quick release strap for a modular helmet - any ideas?

    I have 2 helmets. a Full Face and a Modular. I use this release on both helmets. No cutting of the D Rings is needed. https://www.amazon.com/dp/B01KGGP7SW/?coliid=IH0TI7GLIAMKF&colid=35O8CXFZFZGOP&ref_=lv_ov_lig_dp_it&th=1
  4. Haze

    What did you do to your Spyder today?

    Getting prepared for the BattleBorn Ryde. Heated gear is ready if needed.
  5. Haze

    Random thought for the day

    Texting For Seniors BFF -best friend fell BTW-bring the wheelchair TTYL-talk to you louder BYOT-bring your own teeth LMDO-laughing my dentures out FWIW- forgot where I was IMHAO-is my hearing aid on? OMMR- on my massage recliner ROFLACGU- rolling on floor laughing and can’t get up
  6. Haze

    How do you secure your Helmets when leaving your bike?

    I have a pistol chain lock that I run thru the helmet "D" rings and around my handle bars.
  7. Haze

    HowTo: My Custom Carry Along Wheel Chocks.

    Wheel Chocks Very inventive. Good use of available materials. Nice job.
  8. Haze

    Random thought for the day

    Answer to Computer Issues
  9. Haze

    Review: Lamonster Back Rest for the F3-Limited

    You have inspired me to remount and try my BRP Backrest.
  10. Haze

    What did you do to your Spyder today?

    I replaced one of the PWM units in my jacket heat controller. Controller is a 7yr old DIY unit. Found parts on Amazon. Its getting cold in Northern Nevada and heated jacket and gloves are wonderful.:thumbup::thumbup:
  11. Haze

    My Handlebars are slightly turned to the right. Any easy fixes?

    I have had this same issue on 2 recent F3T's (2017 & 2016). Both had handlebars that were tilted with the right side down... On both bikes the tilt became evident when I installed a 1" handlebar riser. The fix is to align the bike again, and center the bars while paying special attention to...
  12. Haze

    Random thought for the day

  13. Haze

    Random thought for the day

  14. Haze

    Does anyone have/carry an ICE - In Case of Emergency - Capsule?

    Does anyone have or carry an ICE - In Case of Emergency - Capsule? Mine has broken after 6 yrs and needs to be replaced. This is a capsule that hangs on my Jacket Zipper FOB. Its about 1+" long, 1/2" wide, and hollow. It contains a rolled up note with medical info that may be needed in an...
  15. Haze

    Random thought for the day

    Never Forget
  16. Haze

    Random thought for the day

    How Old
  17. Haze

    Random thought for the day

    Clowns
  18. Haze

    What Rear Axle Nut Wrench are you using?

    Belt Alignment I bought a socket and wrench from Amazon. Socket & Combination (open end and box end wrench) which I cut in half and make two wrenches. Also use my 1/2" drive torque wrench to finish the job.
  19. Haze

    Are the customer accessory circuits all connected? Where to tie into them?

    I’m not sure of the wire routing but I know on my F3T all thee circuits are controlled thru 1 fuse. All three circuits have an individual open end that was labeled and taped to the wire harness. All attachments are to the open ends. No cutting into the circuit is necessary. Terminal locations...
  20. Haze

    2020 RT Ltd Cruise Control doesn't work - intermittently - any hints?

    I had a brake spring issue that cause trouble with the Cruise. Cleaned the switch area and fabricated a helper spring to pull the brake pedal up tightly against the brake stop. No subsequent issues. Good luck.
Back
Top