• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Rookiespyder

    Motorcycle Lift

    I just bought the exact same jack as you have today. How do you position the jack under the bike to get at the engine oil drain plug without it being in your way. I need a oil pan under neath to catch the oil.
  2. Rookiespyder

    Brake pads

    How many miles can you get out of your OEM break pads. I have 15000 on mine but not sure when to change them out.
  3. Rookiespyder

    Led haed lights

    The head lights or the fog lights.
  4. Rookiespyder

    Magic Mirrors installed

    I have the magic mirrors on mine ,but the tether is a little short so all I did was run a zip tie between the two wires at each end of the plug and it holds very good.
  5. Rookiespyder

    Led haed lights

    Well I finally got the courage to change my halogen head lights over to LED headlights. I was going to have someone do it for me, but after all the good people on this forum encouraged me to do it myself. The job is done the hardest part was getting the Led bulbs to fit in the housing tight fit...
  6. Rookiespyder

    LED headlights for 2015 RT

    I have tackled my LED headlights. My question is does the machine have to be running after I have installed one or can I just turn the key on. I tried turning just the key but no headlights. I can not start it because I am waiting for my gold plugs to come in the mail. I had a little problem...
  7. Rookiespyder

    LED headlights for 2015 RT

    Now you have just convinced me to let someone else to do the change.
  8. Rookiespyder

    LED headlights for 2015 RT

    So really how hard is it to change them out. I have a set of the TRICLED headlights and was going to get someone to do it for me. I am new to all this mind you I did do my first oil change and air filter change last week without a problem.
  9. Rookiespyder

    Gold Plugs - are the torque specs the same as OEM?

    I mean for tightening them 15 ft pounds or etc
  10. Rookiespyder

    Gold Plugs - are the torque specs the same as OEM?

    Hello,is the Tork specs the same with the Gold Plugs as it is with the OEM. Thanks.
  11. Rookiespyder

    Frunk light

    I feel kind of dumb here, but how do you get the light turned on in the frunk. I have seen others with them on there bikes, I did not think I had one :hun: until I checked further and to my surprise there is one. I have no idea how to turn it on/off. Thanks
  12. Rookiespyder

    Anti freeze/ Prestone

    After doing a oil change I noticed that my anti freeze is down below the cold level. When it is sitting for a few days should it be topped up to the cold line or between the cold and hot line. Thanks
  13. Rookiespyder

    Any ideas to get a stripped Transmission drain plug out?

    I finally got it out. I had to use my drill out bit, then put it on an angle and used the drill as a rachet to get it to bite. Then I ratcheted the drill and it grabbed and unscrewed. It is the clutch cover drain plug. That is what the dealer told me, someone was using the wrong tool likely. So...
  14. Rookiespyder

    Any ideas to get a stripped Transmission drain plug out?

    I tried the next size Torx but that did not work, so I tried the screw outs, but all that did was to spin it in there. If I was to drill it, how far should I GO BEFORE IT GOES IN TO FAR, then try the tap outs?
  15. Rookiespyder

    Any ideas to get a stripped Transmission drain plug out?

    I went to do my first ever oil change on my 2015 RT Limited. I used the T 40 socket to loosen the screw, but on my first turn I realized that it was stripped. So I called a dealer and they suggested for me to try a tap out bit, but to no avail, that did not work. So then I tried vise grips, but...
  16. Rookiespyder

    BRP drivers back rest

    How comfortable is it.
  17. Rookiespyder

    BRP drivers back rest

    Thanks for the install directions.
  18. Rookiespyder

    BRP drivers back rest

    Hello, how hard is it to install a BRP drivers back rest on a 2015 RT Limited. Also it is off a 2015 RTS is it compatible. The seller told me is does not require any hardware. I called a local dealership and they told me I do. So I am not sure. Thanks.
  19. Rookiespyder

    Clock on Dash

    I agree mine is the same.
  20. Rookiespyder

    Can Am Roadside Assistance

    They do,just go to there web site for the updates.
Back
Top