• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Gilly

    Any way to adjust the idle on my 09 SM5??

    Thanks Doug , I will double check the lines and add the seafoam asap . Just seem to start all of a sudden . Thanks for the heads up on not adjustable idle also .
  2. Gilly

    Any way to adjust the idle on my 09 SM5??

    Hi guy's , just asking if their is a way to adjust the idle on my 09 SM5 . It's runs around 1400 and 1450 at idle . Took the side panels off , but still hard to see around front of the throttle body . I did see a screw with blue loctite on it that might do it . But not sure . thanks guys guys
  3. Gilly

    What's the torque spec for Clutch Release Cover Screws?

    Ok guys, she is back on and seems to be ok. Took it for a drive, topped up the oil and torqued the screws again the next day. So far so good. Thanks
  4. Gilly

    998cc Can BRP aftermarket muffler be quiet?

    I have the same problem . It is a bit loud , but the worse is that it is leaking between the first grey ring and the black sleeve . I contacted HINDLE and they said that THEY can repack it . Think i will wait till this winter and see what i can do myself . Good luck and let us know what you end...
  5. Gilly

    What's the torque spec for Clutch Release Cover Screws?

    Thanks guy's , I think that's what the tec that done the work on my bike did . I think he forgot to torque them. I was driving in town and could smell hot oil . Pulled over and had a puddle of oil on the ground . At least I was going slow and not on the hi-way , going home . The cover was so...
  6. Gilly

    What's the torque spec for Clutch Release Cover Screws?

    Lost some socket head screws on the Clutch release cover . Lost 5 out of the 8 and found 2 in the bottom pan. It blew oil every where . Would anyone have a torque spec for them little buggers ? I have a 2009 GS SE5 .
  7. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Well guys .. got her home today . Works like a charm . Took a few more parts that I was hoping , but I'm glade it's done. They had to change the REAR sprocket also . And of course the bearing and seal in it . Showed them the pictures I took of the Dec.2009 Service Bulletin , they never seen it...
  8. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Well guys ... shop called and everything is working great. They are going over the parts list. There were parts that were ordered separately, but came on the shaft. And seals that came in the gasket set and ordered just in case. Will get the updated total tomorrow .
  9. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Well guys... got an update on my bike. They installed the new shaft that had new bearings, gears, and bushing on it. Also the new front sprocket (white) with a new bolt and washer. Replaced the bearing and seal on the rear sprocket. Before I took it there, I had the transmission light come on...
  10. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Thanks guys... That's right, miles and smiles. 180lbs sounds good to me too Freddy. It will be on my Stinger trailer Tuesday morning ready for the road trip.
  11. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Yes ... I will have it stripped down and done right. Parts that need to be replaced, have been ordered. (those we know of) I really do enjoy this ride, got my bike license before my car license. That was 47 years ago, and have never driven anything like it. I just hope it all works out as...
  12. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Freddy, I see you put 115ftlbs on the NEW bolt and washer. What are you putting for tension on YOUR belt? I had a machinist come over last night and after a long discussion, he talked me into doing it the RIGHT way. It will be going in the shop on Tuesday. I want to get all the facts so this...
  13. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Freddy ... the big pulley you're talking about, is that the one on the rear wheel? And if so, is it the double row bearing that the pulley rides? If so, I will order it and the seal for it.
  14. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Ok guys, my new sprocket was ordered today. If they put an order in today, I could see it Friday. If not ordered until tomorrow, I will see it Tuesday. I was told a bolt and washer comes with the new sprocket . " FINGERS CROSSED "
  15. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    If I bite the bullet and get it done right, I want to make sure it doesn't happen again. Bolt at 115ftlb's and need to find the tension for the belt. (New sprocket $200 tax inc.) As far as the 10 - 12 hours... that's what I was told.
  16. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Well guys... I called the shop this morning - the sprocket is $173.39; the Shaft with seal is $397.29; The labor is 10 - 12 hours @ $105 per hour; plus any gaskets that are needed. Of course, the engine has to come out. Looking at just over $2200 plus. The welder is starting to look better and...
  17. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Freddy ... welding was a thought - Sprocket and shaft being toast. I've seen the service bulletin reading 81 to 89 ft/lb for the bolt. I will phone the shop today and get a price on parts and labor. I will need to find the NEW belt tension specs also. I will scare you with a price later. Thank...
  18. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    I have 20,800 klm's on the bike. The shop put a new rear tire on it last year and all I ever did was adjust the belt to run in the right spot.
  19. Gilly

    2009 Front Sprocket - WHAT shape are the teeth on the shaft?

    Don't like the looks of the teeth on the shaft Freddy. Looked at the pictures on the other post... wished mine looked that good. Not sure if the pictures I up loaded came in. I think it did work? One tooth is square and the rest come to a point...
  20. Gilly

    Has anyone done a Y Pipe wrap?

    Not sure on the benefit either .. but I like the looks of it for sure .
Back
Top