• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by gmopsman

  1. G

    Oil leak ?

    I had an oil leak leak at the gasket where the water pump and attaches to the engine. The leak was small and I would have a quarter size puddle under the middle of the bike after a ride. The dealer did not find it the first time. They told me it was the air box. I found it by pulling the right...
  2. G

    Oil leak follow up

    Once I had the tupperware out of the way I was able to run the engine and find the leak.The oil leak turned out to be a leaking gasket at the right side front of the engine. I will be taking it to the dealer this week for repair. Anyone else experianced this problem on a sm5. Thanks
  3. G

    Oil leak, check engine light

    Thanks for the response. The check engine light is coming on as the result of the juice box pro according to buds. It clears as soon as i shut off the key and restart the spyder and does not return. I will check the oil pressure sensor location. THANKS
  4. G

    Oil leak, check engine light

    I am looking for some advice. I have an oil leak on the right hand side. It is showing up on the right underside protective panel. I know it is not coming from the air box area as I have had this apart and it is clean. I also have a catch can installed to be sure no oil reaches the air filter...
  5. G

    Juice box pro/hindle install

    I set the jb pro by dial. This was based on the programs being preloaded on the unit.
  6. G

    Juice box pro/hindle install

    I just completed installing the juice box pro, hindle exhaust and a green filter. The total install time took about 4 and a quarter hours for me. But I put down a tarp to layall the pcs on and took my time so I didn't have to do it twice. The hardest part for me was removing the entire air...
  7. G

    201X mileage as of today

    2009 rs purchased new May 2010---6495 miles and many more to come.:2thumbs:
  8. G

    DPS replacement

    DPS Replacement My dealer, America's Motor Sports in Nashville TN. set a dps unit aside for me. They started the work on Tuesday morning and had it ready for pick up before lunch. They have already completed 5 replacements. The new dps unit has made the steering imput more smooth and...
  9. G

    DPS Recall

    I got my letter today. I talked to my dealer last week and he has 3 units in. He has set one aside with my name on it. Unfortunately his Spyder Tech is on vacation until Tuesday 9-22-10.
  10. G

    Finally stopped the popping and surging with O2 Mod

    I just finished installing my O2 modifier. I removed my O2 sensor but taped and tied it up under the bike. Based on my first ride with the O2 modifier in place, I do not see going back to the old sensor.:2thumbs:
  11. G

    Motorcycle Jack

    A standard motorcycle lift is what I use to raise up my Spyder. I also use jack stands once I have the Spyder in the air and then remove the lift to allow easy access.
  12. G

    DPS Replacement- Letter to Owners

    I checked with my dealer and he did not know anything about this. I just had my dps replaced 1.5 weeks ago but it looks like it will have to be done again per this recall.:gaah:
  13. G

    o2 modifier install

    I am about to install the Evoluzione O2 modifier and have a couple of questions: 1. It calls for the battery to be disconnected. Can you do this install with out doing this or is this needed to protect the emc. 2. If the battery is disconnected does the spyder have to be set up again on buds. Thanks
  14. G

    Anti-Vib with Kewl Metal Risers??

    I am using smooth city handle bar weights from Manic Salamander with my KewlMetal risers. These are external but work well.
  15. G

    lift and jack placement.

    Could someone post or send me pictures of the placement point to lift the Spyder with a motorcycle jack and placement of jack stands front and rear once you get it up. Thanks
See more
Back
Top