• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by GeorgeXP700

  1. G

    What did you do to your Spyder today?

    I've posted my 2022 RT Limited for sale. :popcorn:
  2. G

    ACS failure message - which connector is for compressor?

    Already checked it, connected.
  3. G

    ACS failure message - which connector is for compressor?

    Thanks for the insight.
  4. G

    ACS failure message - which connector is for compressor?

    Add my 22 RTL with 1600 miles to the list of ACS failures. My wife and I were riding Saturday on a road with a few dips when "suspension failure" message popped up. I stopped, shut it off and it was gone...at least for a few miles down the road. Got back home and checked the sensor linkage, it...
  5. G

    Air compressor - anyone tried a Switch? & where is the fuse?

    Add my 22 RTL with 1600 miles to the list of ACS failures. My wife and I were riding Saturday on a road with a few dips when "suspension failure" message popped up. I stopped, shut it off and it was gone...at least for a few miles down the road. Got back home and checked the sensor linkage, it...
  6. G

    What's the best Can Am Spyder lift?

    What exactly are looking for? A lift for an occasional oil change or as I used my HF aluminum to lift my RTL up enough so I could spin the wheels to wash them? I originally bought it to install a BajaRon sway bar. Between the lift and blocks it worked flawlessly.
  7. G

    Should Tupperware be this far off

    Mine was the same. Had to loosen the screws on the front panel and adjust. The rear panel I found one clip hole slightly off. Trimmed hole and snapped on tighter.
  8. G

    Maiden voyage a success

    That’s a cool little rig. Got me thinking
  9. G

    Where did you start?

    My brother and I got a K Mart mini bike for Christmas 1969. From there. 1974 Honda XL100 in 1975. Next was a used Suzuki TS100 late 1979. My first street bike bought new 1983 Suzuki Katana that I still have. Then there was my 2010 Triumph Scrambler followed by a 2013 Yamaha R1 from a friend...
  10. G

    ..EMERGENCY .. for 2022 RYKER owners - recall on Handle-bar bolts!

    You can take your ride anywhere you want as long it’s an authorized BRP dealer. Being that said they may put you on a back burner and take care of their regulars first.
  11. G

    Dealer claimed they couldn't release my Spyder if it failed the sprocket wear test!

    Or let you have loaner until the issue was resolved.
  12. G

    ..EMERGENCY .. for 2022 RYKER owners - recall on Handle-bar bolts!

    If it was mine I’d remove the bolt and replace with an equivalent preferably better grade fastener and ride until the dealer has a replacement.
  13. G

    Will an a/mkt belt tensioner fix Drive noise 48-55mph? 2020 RTL

    I know. Also updated it to a Lamonster damper.
  14. G

    Will an a/mkt belt tensioner fix Drive noise 48-55mph? 2020 RTL

    With a 2013 RSS I used to own. I tuned (adjusted) the belt tension so vibration happened in a speed range outside of normal speed. Surprisingly my 22 doesn’t vibrate at all.
  15. G

    Do you think the installation of a thicker swaybar/metal endlinks was worth it ??

    Well worth it. Best mod for the money.
See more
Back
Top