• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by ClayJ

  1. C

    2019 RT Ltd - won't shift into 1st - FIXED - reverse bracket was bent

    Follow up. I put a jack under the front left and lifted the wheel well off the ground. That was so I could get a jack under the bracket itself and gently lift. It took more lifting than I thought to get it back up near what I assume is the original position. I set the bike back down and it...
  2. C

    2019 RT Ltd - won't shift into 1st - FIXED - reverse bracket was bent

    Yes. Foot on the brake for shifting from Reverse or Neutral into 1st
  3. C

    2019 RT Ltd - won't shift into 1st - FIXED - reverse bracket was bent

    I was unloading my Spyder off of my Stinger Trailer this morning and I heard a bump as it came off. When I stopped and tried to shift into 1st, it just shifted into Neutral. Despite repeated attempts to shift into 1s it just stays in Neutral. I turned it off and let it sit a while, but it still...
  4. C

    Installing Rear view/backup camera - what wire & where to trigger it?

    I use a Capuride 712D. I did a temporary install of the cameras with command strips and zip ties to get the feel for it. After a month of riding, I took the cameras back off because I never used them and didn't see the point. I repositioned the cameras several times trying to see if there...
  5. C

    I made a Foldable cup holder for my trunk - 2019 RTL

    That is a very good option. I keep my rain gear in the frunk, but it's light enough that it probably wouldn't crush the holder or the drinks. I'll keep the trunk side mounts because they're out of the way and take almost no room, but I might add this for those times when I pick up enough for a...
  6. C

    I made a Foldable cup holder for my trunk - 2019 RTL

    Whenever I grab fast food on my Spyder, I'm usually left trying to figure out how to get the drinks home without spilling them everywhere. I usually try to barricade them in the trunk somehow using whatever things happen to be in there. Often, the pressure pops the lid off and the drink spills...
  7. C

    I didn't mean to blame you for anything. You didn't do anything wrong. I blame the admins for...

    I didn't mean to blame you for anything. You didn't do anything wrong. I blame the admins for not giving me a chance to respond and point you in the directions you could go if you want one. I also blame myself for not making it clear in my post that I didn't want to print these and giving...
    • ClayJ
    • Profile post comment
  8. C

    I think your post about paying me to 3d print the holder almost got me banned. I know it got...

    I think your post about paying me to 3d print the holder almost got me banned. I know it got the thread locked. They said I was advertising on the site and would be banned if I did it again. As for printing one, no. But you can find many online places that will 3d print things. Just point...
    • ClayJ
    • Profile post
  9. C

    3D printed Passenger Handrail RAM Mount - For drink holder

    Here's my take on a drink mount for my passenger. I designed it myself after taking some measurements and looking through the ram mount parts I had on hand. I have a 2019 Spyder RTL and it fits very well. I don't know if it will fit the newer models or not. I tried 2 or 3 other methods for...
  10. C

    2019 RTL won't shift up (fixed'ish - only now it's un-fixed again!)

    I'm not sure why you're so bothered by this but here goes. Quite a few times when the bike would stop shifting, I'd go into the display and navigate down to the "Codes" page but it was always empty. I never got an answer whether ALL codes get displayed or just some. I took the bike in twice...
  11. C

    Curious for comments on Twisted Sisters ride in Texas?

    I've ridden the Twisted Sisters 2 times in the Spring. The flowers are a highlight.
  12. C

    2019 RTL won't shift up (fixed'ish - only now it's un-fixed again!)

    The problem is that the shifting issue was intermittent and random. There was no way to make it happen on demand.
  13. C

    2019 RTL won't shift up (fixed'ish - only now it's un-fixed again!)

    SEEMS TO REALLY BE FIXED FINALLY Back in July, the bike completely stopped shifting up. I called the shop but they couldn't get it in for 2 weeks. Every day I'd go start the bike and try to shift into 1st but it never would so I was hoping it would stay broken for the mechanic. I finally...
  14. C

    2019 RTL won't shift up (fixed'ish - only now it's un-fixed again!)

    I finally got it to fail and stay broken. I was on a long ride round Colorado this week. After stopping at the Wolf Creek Pass overlook, it wouldn't shift up for about 45 minutes but eventually it worked again (like it always does). We finished the days ride over cottonwood pass and into...
  15. C

    2019 RTL won't shift up (fixed'ish - only now it's un-fixed again!)

    It happened again today. After 2 hours on the road, I stopped at a scenic overlook. When I got back on the bike, it wouldn't shift. It's been 4 months since I last had a problem... It's annoying as all get out, but I still don't think I can justify $500 on the hope that it fixes the problem!
See more
Back
Top