The shop that installed the tire backwards has offered to replace the rear tire for free! That is how reputable Spyder Folks are!!! I declined the offer as we all are capable of making mistakes. Thanks my Friend!!!:thumbup:
Did you put any miles on that tire? If you did have them replace tire, it is not good to run a radial tire one way and then turn it around and run the
other way
In case you missed it in his other thread about this, the dealer who installed the tire is 6 hours away. Pretty strong incentive to just be grateful for the offer and then let it go.Did you put any miles on that tire? If you did have them replace tire, it is not good to run a radial tire one way and then turn it around and run the
other way
I don't remember from the other thread but do you have any idea how many miles are on the tire? If not very many I would just have a local tire shop, or bike shop, take it off and reverse it. Even if they charge you $20 that's a lot cheaper than a six hour trip to have the dealer change it.The shop that installed the tire backwards has offered to replace the rear tire for free! That is how reputable Spyder Folks are!!! I declined the offer as we all are capable of making mistakes. Thanks my Friend!!!:thumbup:
Hi Silvervette05,
Re: it is not good to run a radial tire one way and then turn it around and run the other way
I have always been of this opinion but last year I had a discussion about this very subject with the guys at Tire Rack. They told me that newer radials can be reversed.
Just sayin,
Jerry Baumchen
Car tires are somewhat different. They are not normally unidirectional. Motorcycle tires are unidirectional for more than one reason. Tread wear is one. But water shedding is most important. They are designed to push water in one direction to prevent hydroplaning. Mounting them "backwards" will push water the wrong way increasing the chance of hydroplaning. There is also the possibility of belt separation. At the least, it won't run right if it's reversed because of tread wear.