First Code -- Thank You SpyderCodes and SpyderLovers!

[Spyder_Cowgirl]

Got my first code :2excited: Huh ... you say? Why be excited over an error code? Well, I turned to my trusty phone and SpyderCodes to Look up U0155 (now saved, BTW) .... says has something to do with communication error in the CANBus (yikes)! nojoke Then I come here, to the board, and see what this crowd has to say about the code. NO BIG DEAL and not uncommon when one is changing the clock, if the :spyder2: moves (even just a tiny bit) -- which I guess mine did while I was fiddling with the clock, because I know I didn't have my foot on the brake and had not yet set the parking brake since I was sitting on a level surface in our shop.

So ... thank you Roger for SpyderCodes :clap: and thank you SpyderLovers :clap: for putting my mind at ease ... All the best Ann

 

[Cruzr Joe]

You go girl. :thumbup::thumbup:


Cruzr Joe

 

[Chupaca]

There you go...!!

that's what it's all about. The great part is being able to help..:2thumbs: ryde on...:thumbup:

 

[Trbayth]

For as expensive as these machines are it still amazes me how finicky they are. Why on earth should moving the bike a bit while adjusting the clock throw an error?

 

[finless]

I never heard of getting a code when setting the clock?

What's this bug about exactly?

My clock runs fast so after about a month it is off by about 5 minutes. So I reset it all the time and never got a code?

Is this only on specific model years?

Bob

 

[GunDoctor]

It has a clock?


Another Day To Be My Kid's Dad [emoji379]

 

[Spyder_Cowgirl]

Reason for the Error

I never heard of getting a code when setting the clock?

What's this bug about exactly?

My clock runs fast so after about a month it is off by about 5 minutes. So I reset it all the time and never got a code?

Is this only on specific model years?

Bob

Bob .... you can't set the clock while driving (the spyder won't let you get to those settings) nojoke So, if the :ani29: moves while you are setting the clock, something in it's programming says "hey ... you can't do that!" and tosses an error at you for good measure.

All the best .... Ann

 

[finless]

Well I have always been stopped when setting the clock but I do have to try this...

So while the engine is NOT running and your setting the clock you just let the Spyder roll a little to get it to complain?

Bob

 

[Spyder_Cowgirl]

Clock and Engin

Well I have always been stopped when setting the clock but I do have to try this...

So while the engine is NOT running and your setting the clock you just let the Spyder roll a little to get it to complain?

Bob

Bob ... in this case, my engine was still running. Had just pulled in from a ride and decided to set the clock before shutting down. Normally, I set the clock in "static" mode (no running engine) and, like you, had never received an error.

All the best .... Ann

 

[rbob]

clock

I see my clock is an hour and a quarter fast after a year. I might as well wait till the time change now to look up the procedure for adjusting. The GPS still gives me the right time