Ideas to dress up the RT Rear End

[cognaccruiser]

I had mine painted and the paint shop said it just needs to be sanded then cleaned with a chemical to remove the antyadhesive oil used in the mold when manufactured. Mine was done 2 years ago and no sign of peeling or any problems and I think it looks a lot better. Had dash painted also.
Roger

I like that A LOT :thumbup:

Gary

 

[Bob Denman]

:agree: That looks gorgeous!! :clap: :2thumbs:

 

[Pennyrick]

I had mine painted and the paint shop said it just needs to be sanded then cleaned with a chemical to remove the antyadhesive oil used in the mold when manufactured. Mine was done 2 years ago and no sign of peeling or any problems and I think it looks a lot better. Had dash painted also.
Roger

That is what I had in mind. Did they paint it on the Spyder or was it disassembled. I really, like the looks of your machine. Did you also paint the lower part on the side or is that an extension of your floorboards I see in the photo?

 

[Bob Denman]

I believe that it's all part of Vertika's floorboards... :shocked: :bowdown:

 

[spacetiger]

I had mine painted and the paint shop said it just needs to be sanded then cleaned with a chemical to remove the antyadhesive oil used in the mold when manufactured. Mine was done 2 years ago and no sign of peeling or any problems and I think it looks a lot better. Had dash painted also.
Roger

Did you consider painting the top/side case latch area?

jerry

 

[ronrico]

At the last Spyderfest 'R; diamond had a new thing they were selling. It was a the black panel from the back of an RT painted to the color of your sypder and with a couple of LED light strips also. I would check on the main page here for there wed site.

 

[Pennyrick]

At the last Spyderfest 'R; diamond had a new thing they were selling. It was a the black panel from the back of an RT painted to the color of your sypder and with a couple of LED light strips also. I would check on the main page here for there wed site.

Diamond R only offer 11 items for the Spyder and none of them is a back panel for an RT.

Thanks anyway. Could it have been another vendor?

 

[Barbwire]

www.mblinnovations.com sells a custom shorty fender that was designed for me. I love it and there is less road crud on the back of my RT than what I had with the long fender.

 

[Buggy]

I had mine painted and the paint shop said it just needs to be sanded then cleaned with a chemical to remove the antyadhesive oil used in the mold when manufactured. Mine was done 2 years ago and no sign of peeling or any problems and I think it looks a lot better. Had dash painted also.
Roger

That at is pretty sexy!

 

[ARtraveler]

I am seeing some nice treatments. Keep them coming if possible. :yes:

 

[R FUN]

I removed the rear fender which is very easy, The lower panel is part of the vertika floor boards but I figure that lower panel could also be painted, I had the dash painted but did not figure in painting anything else.Removing the parts is very easy to do and makes the job easier for the paint shop,

 

[Bob Denman]

:clap: Beautiful job! :2thumbs:

what do you think of the Vertika front fenders for the Spyder?

 

[R FUN]

I think BRP got some ideas for there new front fenders from the vertika fenders, but I had the white/red strip lites by Reggie installed on mine and someday hope to change rides to the newer engine and tranny so am not going to do any more farkeling.

 

[Bob Denman]

:shocked: No more farkling??? :yikes:

Oh; the inhumanity of it all!!!

 

[Bob Denman]

Does anybody want some more lights?

http://www.ebay.com/itm/CAN-AM-SPYD...Parts_Accessories&hash=item2edabe9fdd&vxp=mtr

 

[tbhlaw]

Dress Up RT Backend

Consider the LED American flag available through SquaredAway/ It is about 3" x 5" and looks great.

 

[cohoff]

I removed the rear fender which is very easy, The lower panel is part of the vertika floor boards but I figure that lower panel could also be painted, I had the dash painted but did not figure in painting anything else.Removing the parts is very easy to do and makes the job easier for the paint shop,

Your RT looks sharp. I'm considering getting my rear fender painted. Could you tell me what is involved in taking the rear fender off?

 

[Oldmanzues]

Some great ideas on here.
I would add, all kinds of LED strip set ups/design your own. Extra brake light, Tricled and other SL sponsors.
Flags, ICSC and Rivco have flag mounts for 9x11 and 11x14 (I think) flags, Parades special occassions, add a mount for a 3 foot by 5 foot Flag .
Have fun.
Oldmanzues

 

[Kelly1952]

I had mine painted and the paint shop said it just needs to be sanded then cleaned with a chemical to remove the antyadhesive oil used in the mold when manufactured. Mine was done 2 years ago and no sign of peeling or any problems and I think it looks a lot better. Had dash painted also.
Roger

Good looking Spyder!!!! Love the floor boards!!!!!!

 

[R FUN]

Hi COHOFF;
I do not recall exactly but the fender is just attached by a few screws and came off real easy and remove the licence plate lite. My memory isnt what it once was now 76, but I do remember it was an easy job but it was 2 years ago that I did it .